| Operating Instructions |
| Adjusting Rinse Aid Dosing |
3 | The dose should be adjusted according to the finish and drying results |
| obtained. The dose is factory set at 4, and can adjusted from 1 to 6. |
Gradually increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce if it there are sticky whitish streaks on the dishes.
0 1. Turn the lid of the container ¼ of a turn anticlockwise and
remove.
2. Adjust the dose setting with a tea spoon.
3. Replace the lid and tighten by turn- ing clockwise.
4.If rinse aid has run out, wipe up with
a cloth.
13