Electrolux 40250 i manual Installation And Connection Instructions, Installing the Dishwasher

Page 28

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted such that it is stable and level.

•To compensate for unevenness in the

floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing. Depending on the design of the threaded feet use either

– an open-end spanner

– a screwdriver.

•For built-in, integrated and fully integrated dishwashers, the rear feet should be adjusted from the front of the appliance using a screwdriver.

•The drain hose, inlet hose and mains cable must be laid such that they are free to move in the rear of the plinth recess, so that they cannot be kinked or crushed.

•The dishwasher must also be screwed on tightly to the work surface or to the adjoining units. This is absolutely necessary so that its stability is guaranteed according to VDE regulations.

Image 28

Contents ÖKOFAVORIT 40250 Dishwasher User InstructionsDear customer CONTENTS ContentsBio Wash Programmes and Concentrated Detergents Changing/Interrupting the Wash ProgrammeInstallation and Connection Instructions 1 Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use 2 Disposal 2 Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Rubber Seal for Connecting the Water Feed to the Upper Spray ArmSpray Arms Water Hardness Switch Container for DetergentPrior to using for the first time Control PanelAdjust the Water Softener Filling with Salt for the Water Softener Fill with dishwasher saltFilling with Rinse Aid Fill with rinse aidAdjusting Rinse Aid Dosing In Daily Use Loading Cutlery and DishesLoading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rack0 1. Slightly lift the right plate insert 2. Fold the plate insert to the leftLoading Cups, Glasses and Coffee Services offset from each other and water can reach all itemsThe cup racks can be folded up out of the way for tall items Lay or hang wine, champagne, andFilling with Detergent Fill with DetergentBio Wash Programmes and Concentrated Detergents Detergent RecommendationsConventional, alkaline detergents with caustic components Weak alkaline concentrated detergents with natural enzymesSelecting the Wash Programme Programme Table Choose the most suitable wash programme with the aid of this tableNORMAL Programme SequenceChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Care and Cleaning Switching Off the DishwasherEmptying the Dishwasher washerCleaning the Filter The filters should be checked andThe dishwasher filter system com base of the washing compartmentthere are problems with the operation of the dish- washer What to do, ifthe wash result is unsatisfactory The dishes are still dirtyThe dishes are wet and dull There are dried water drops on the glasses and dishesTechnical Data This appliance conforms with the following EU Directives73/23/EWG dated 19. 02. 1973 - Low Voltage Directive 89/336/EWG dated 03. 05Bottom rack with cutlery basket Notes for Test InstitutesExample Loading Arrangement Upper rack lower and upper positions INSTALLATION AND CONNECTION INSTRUCTIONS Installing the DishwasherBuilt-In Dishwasher Dishwashers That Can Be IntegratedFree-Standing Appliances 3 The plinth on free-standing appliances is not adjustable Decor panel dimensions Height 590 mm Width 581 mmwork surface must be re-mounted Clamp thickness max. 4 mmConnecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater drain Drain hoseExtension hoses Sink outlet connectionLeak Prevention System appliance is automatically pumped outElectrical Connection Changing a fuseried out by a qualified electrician or competent person WARNING - This appliance must be earthedConnections Two 45 or Straight ConnectionsWater inlet MainsGUARANTEE CONDITIONS Guarantee ConditionsPage Page 08705 929 SERVICE & SPARE PARTSCustomer Care AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG 822 945 464 - 00