Electrolux 40250 i manual Care and Cleaning, Switching Off the Dishwasher, Emptying the Dishwasher

Page 22

washer

Operating Instructions

	Interrupting the wash programme by opening the door of the dish-
	washer
1	Hot steam may escape when the door is opened. Open the door care-
	fully.
0 1.	Open the door of the dishwasher. The wash programme stops.

2.Shut the door. The wash programme continues.

Switching Off the Dishwasher

When the wash programme is finished:

01. Turn the program selector to the I position. Power indicator light goes out.

1Hot steam may escape if the door is opened immediately after the end of the programme. Therefore:

2.Open the door carefully.

	Emptying the Dishwasher
3	• Hot dishes are sensitive to knocks. The dishes should therefore be
	allowed to cool down before removing them from the appliance.

• The dishes will dry quicker if, when the programme has finished, you briefly open the door fully and then leave it slightly ajar.

• Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and can cool down.

• Empty the lower rack first, then the upper rack. In this way you will avoid any water left on the upper rack dripping onto the dishes in the lower rack and causing water spots.

Care and Cleaning

1	Do not under any circumstances use furniture care products or aggres-
	sive cleaners.

• If necessary, clean the controls only with a soft cloth and pure warm water.

• The spray arms do not need cleaning.

• Occasionally check the internal containers, door seal, and water inlet for soiling, clean if necessary.

22

Image 22

Contents ÖKOFAVORIT 40250 Dishwasher User InstructionsDear customer Bio Wash Programmes and Concentrated Detergents CONTENTSContents Changing/Interrupting the Wash ProgrammeInstallation and Connection Instructions Child Safety 1 Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material 2 Disposal2 Economical and Ecological Dishwashing Disposal of Old AppliancesSpray Arms Water Hardness Switch Appliance Features and Control PanelRubber Seal for Connecting the Water Feed to the Upper Spray Arm Container for DetergentPrior to using for the first time Control PanelAdjust the Water Softener Filling with Salt for the Water Softener Fill with dishwasher saltFilling with Rinse Aid Fill with rinse aidAdjusting Rinse Aid Dosing In Daily Use Loading Cutlery and DishesLoading Cutlery 0 1. Slightly lift the right plate insert Loading Pans, Frying Pans and Large PlatesLoad large and heavily soiled dishes in the lower rack 2. Fold the plate insert to the leftThe cup racks can be folded up out of the way for tall items Loading Cups, Glasses and Coffee Servicesoffset from each other and water can reach all items Lay or hang wine, champagne, andFilling with Detergent Fill with DetergentConventional, alkaline detergents with caustic components Bio Wash Programmes and Concentrated DetergentsDetergent Recommendations Weak alkaline concentrated detergents with natural enzymesNORMAL Selecting the Wash Programme Programme TableChoose the most suitable wash programme with the aid of this table Programme SequenceChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher washerThe dishwasher filter system com Cleaning the FilterThe filters should be checked and base of the washing compartmentthere are problems with the operation of the dish- washer What to do, ifThe dishes are wet and dull the wash result is unsatisfactoryThe dishes are still dirty There are dried water drops on the glasses and dishes73/23/EWG dated 19. 02. 1973 - Low Voltage Directive Technical DataThis appliance conforms with the following EU Directives 89/336/EWG dated 03. 05Bottom rack with cutlery basket Notes for Test InstitutesExample Loading Arrangement Upper rack lower and upper positions INSTALLATION AND CONNECTION INSTRUCTIONS Installing the DishwasherBuilt-In Dishwasher Dishwashers That Can Be IntegratedFree-Standing Appliances work surface must be re-mounted 3 The plinth on free-standing appliances is not adjustableDecor panel dimensions Height 590 mm Width 581 mm Clamp thickness max. 4 mmPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionLeak Prevention System appliance is automatically pumped outried out by a qualified electrician or competent person Electrical ConnectionChanging a fuse WARNING - This appliance must be earthedWater inlet ConnectionsTwo 45 or Straight Connections MainsGUARANTEE CONDITIONS Guarantee ConditionsPage Page 08705 929 SERVICE & SPARE PARTSCustomer Care AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG 822 945 464 - 00