Electrolux 50700 manual Setting or Changing the Delay Start Timer, Load Sensing Sensor Logic

Page 23

Operating Instructions

0 1. Open the door of the dishwasher. The wash programme stops.

2.The indicator for the programme that is currently running extinguishes.

3.Close the door. The wash programme continues.

Cancelling the wash programme

0 1. Press the button for the current wash programme and hold it pressed. The programme indicator for the current wash programme flashes for a few seconds and then extinguishes.

2.Release the programme button, the wash programme is cancelled.

3	A selected programme is only interrupted by switching off the dish-
	washer, it is not cancelled. The wash programme is continued when the

dishwasher is switched on again.

Setting or Changing the Delay Start Timer

Using the delay start timer you can:

1.Press the ON/OFF button.

2.Press the DELAY TIMER button until the required delay (inhours) is flashing on the multi-display.

3.Press the button for the desired wash programme. The multi-display now displays the number of hours until the wash programme starts.

4.The wash programme starts automatically at the end of the time delay set.

Changing the delay start:

As long as the wash programme has not started, you can change the delay start set by pressing the DELAY TIMER button.

Load Sensing – Sensor Logic

If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.

23

Image 23

Contents Ökofavorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Control panel Prior to using for the first timeHardness range of the water in your area Adjust the Water SoftenerSalt Open the door, remove the lower rack Filling with Salt for the Water SoftenerFill with dishwasher salt Use dishwasher saltFill with rinse aid Filling with Rinse AidOugh rinsing, spot and streak free drying Age the applianceDaily Use Adjusting Rinse Aid DosingNot be washed in the dishwasher Loading Cutlery and DishesLoading Cutlery Load large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans and Large PlatesLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Type Lowering the Upper BasketFill with detergent Filling with DetergentDetergent Recommendations Bio Wash Programmes and Concentrated DetergentsSoiling Selecting the Wash Programme Programme TableChanging the wash programme Changing/Interrupting/CancellingStart the Wash Programme Wash ProgrammeChanging the delay start Setting or Changing the Delay Start TimerCancelling the wash programme Dishwasher is switched on againEmptying the Dishwasher Care and CleaningSwitching Off the Dishwasher Cleaning the Filter What to do, if Error messagesDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Upper basket Lower basket with cutlery basket Sample loading arrangementsCannot be kinked or crushed Installing the DishwasherFree-Standing Appliances Unscrew the screws 1 from the elbows on the back side Connect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG