Electrolux 40300 manual Switching Off the Dishwasher, Emptying the Dishwasher, Washer

Page 22

Operating Instructions

	Interrupting the wash programme by opening the door of the dish-
	washer
1	Hot steam may escape when the door is opened. Open the door care-
	fully.
0 1.	Open the door of the dishwasher. The wash programme stops.

2.Shut the door. The wash programme continues.

Switching Off the Dishwasher

When the wash programme is finished:

0 1. Turn the programme selector to the I position. Power indicator light goes out.

1	Hot steam may escape if the door is opened immediately after the end
	of the programme.

2.Open the door carefully.

	Emptying the Dishwasher
3	• The dishes should therefore be allowed to cool down before removing
	them from the appliance, as hot dishes can be sensitive to knocks.

• Leave the dishes in the dishwasher for approx. 15 minutes after the end of the programme so that they dry better and can cool down.

• Empty the lower rack first, then the upper rack. This will avoid any water left on the upper rack dripping onto the dishes in the lower rack and causing water spots.

22

Image 22

Contents Ökofavorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelAdjust the Water Softener Your areaOpen the door, remove the lower Rack Filling with Salt for the Water SoftenerFill with dishwasher salt Turning it anticlockwiseAge the appliance Filling with Rinse AidOugh rinsing, spot and streak free drying Fill with rinse aidAdjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesLoading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentBio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table Type of SoilingChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Emptying the Dishwasher Switching Off the DishwasherWasher Care and Cleaning Cleaning the FilterPut the flat filter back in the base Washing compartment What to do, ifStances Dishes are still dirty There are problems with the operation of the dish- washerWash result is unsatisfactory Wrong wash programme was selectedRinse aid was not used Rinse aid container is empty Drain hose is incorrectly laidDishes are wet and dull Decrease rinse aid dosingTechnical Data Sample loading arrangements Upper basket Lower basket with cutlery basketFree-Standing Appliances Installing the DishwasherCannot be kinked or crushed Unscrew the screws 1 from the elbows on the back side Permitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionLeak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Page Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG