Electrolux 40300 manual Leak Prevention System, Appliance is automatically pumped out

Page 33

Installation and Connection Instructions

	Leak Prevention System
	For protection from damage due to water leaks, the dishwasher is
	equipped with a leak prevention system, the AQUA CONTROL SYSTEM.
	In the event of a fault, the drain pump switches on. By this means
	water can neither escape nor overflow. The remaining water in the
	appliance is automatically pumped out.
1	The AQUA CONTROL SYSTEM also works when the appliance is switched
	off – the appliance must however not be disconnected from the mains.

33

Image 33

Contents Ökofavorit Dear customer Tips on using the appliancePlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Installation, Connection and Placing into Operation Safety InstructionsChild Safety General SafetyCorrect Use Economical and Ecological Dishwashing DisposalDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Prior to using for the first timeYour area Adjust the Water SoftenerFill with dishwasher salt Filling with Salt for the Water SoftenerOpen the door, remove the lower Rack Turning it anticlockwiseOugh rinsing, spot and streak free drying Filling with Rinse AidAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseLoading Cutlery Load large and heavily soiled dishes in the lower rack Loading Pans, Frying Pans and Large PlatesLoading Cups, Glasses Coffee Services Fill with detergent Filling with DetergentDetergent Recommendations Bio Wash Programmes and Concentrated DetergentsType of Soiling Selecting the Wash Programme Programme TableStarting the Wash Programme Changing/Interrupting the Wash ProgrammeChanging the wash programme Switching Off the Dishwasher Emptying the DishwasherWasher Cleaning the Filter Care and CleaningWhat to do, if Put the flat filter back in the base Washing compartmentStances Wash result is unsatisfactory There are problems with the operation of the dish- washerDishes are still dirty Wrong wash programme was selectedDishes are wet and dull Drain hose is incorrectly laidRinse aid was not used Rinse aid container is empty Decrease rinse aid dosingTechnical Data Upper basket Lower basket with cutlery basket Sample loading arrangementsInstalling the Dishwasher Free-Standing AppliancesCannot be kinked or crushed Unscrew the screws 1 from the elbows on the back side Water Connection Connecting the DishwasherPermitted water pressure Connect the inlet hoseDrain hose Water drainExtension hoses Sink outlet connectionAppliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG