Electrolux 40300 manual Sample loading arrangements, Upper basket Lower basket with cutlery basket

Page 28

Operating Instructions

Notes for Test Institutes

Testing in accordance with EN 60704 must be carried out with the appliance fully loaded and using the test programme (see Programme Table).

Tests in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see Programme Table).

 

Full Load:

Half Load:

 

12 place settings

6 place settings incl. serving, leaving

 

incl. serving dishes

alternate positions free

Detergent Dosing:

5g + 25g (Type B)

20g (Type B)

Rinse Aid Setting:

4 (Type III)

4 (Type III)

 

 

 

Sample loading arrangements:

Upper basket

Lower basket with cutlery basket

Cutlery basket

28

Image 28
Contents Ökofavorit Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Prior to using for the first time Control PanelAdjust the Water Softener Your areaFilling with Salt for the Water Softener Fill with dishwasher saltOpen the door, remove the lower Rack Turning it anticlockwiseFilling with Rinse Aid Ough rinsing, spot and streak free dryingAge the appliance Fill with rinse aidAdjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesLoading Cutlery Loading Pans, Frying Pans and Large Plates Load large and heavily soiled dishes in the lower rackLoading Cups, Glasses Coffee Services Filling with Detergent Fill with detergentBio Wash Programmes and Concentrated Detergents Detergent RecommendationsSelecting the Wash Programme Programme Table Type of SoilingChanging/Interrupting the Wash Programme Starting the Wash ProgrammeChanging the wash programme Emptying the Dishwasher Switching Off the DishwasherWasher Care and Cleaning Cleaning the FilterPut the flat filter back in the base Washing compartment What to do, ifStances There are problems with the operation of the dish- washer Wash result is unsatisfactoryDishes are still dirty Wrong wash programme was selectedDrain hose is incorrectly laid Dishes are wet and dullRinse aid was not used Rinse aid container is empty Decrease rinse aid dosingTechnical Data Sample loading arrangements Upper basket Lower basket with cutlery basketFree-Standing Appliances Installing the DishwasherCannot be kinked or crushed Unscrew the screws 1 from the elbows on the back side Connecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater drain Drain hoseExtension hoses Sink outlet connectionLeak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Page Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG