What to do if …
Problem | Possible cause | Remedy |
The cooking zones are not | Consult the instruction manual for the | |
working |
|
|
The oven is not heating up | The oven has not been | Switch on the oven |
| switched on |
|
| The clock has not been set | Set the clock to the cur- |
|
| rent time |
|
|
|
| The required settings have | Check the settings |
| not been set |
|
| The ovenís safety | See Oven Safety |
| been triggered |
|
| The house wiring fuse (in the | Check fuse If the fuses |
| fuse box) has tripped | trip several times, please |
|
| call a qualified electrician |
|
|
|
The oven lighting is not | The oven light bulb is faulty | Replace oven bulb |
operating |
|
|
F11 appears in the clock | The meat probe has short | Insert the plug of the |
display | circuited or the plug of the | meat probe as far as it will |
| meat probe is not firmly in | go into the socket on the |
| position in the socket | side wall of the oven |
An error code not listed | Fault in the electronics | Switch off the appliance |
above appears in the time |
| via the house fuse or the |
display |
| safety switch in the fuse |
|
| box and switch it on again |
|
| If displayed again, please |
|
| contact your local Service |
|
| Force Centre |
|
|
|
If you are unable to remedy the problem by following the above suggestions, please contact your dealer or the Customer Care De- partment.
61