Emerson 1700, 2700 3 9-wire remote installations, wire remote Wall mount or pipe mount

Installing the Transmitter

Figure 2-4Transmitter components – 4-wire remote or remote core processor with remote transmitter installations

Ground screw

	Main enclosure
	Conduit opening
	for 4-wire cable
Mounting bracket
4 X Cap screws	Junction housing
(4 mm)
Junction end-cap	Mating connector
	socket
	Mating connector

2.4.39-wire remote installations

If you chose a 9-wire remote installation (see Figure 2-1), see Figure 2-5for a diagram of the mounting bracket supplied with the transmitter/core processor assembly. Ensure that the transmitter is mounted and oriented in a way that will allow easy access to the terminals and to the display (if your transmitter has a display).

Figure 2-59-wire remote – Wall mount or pipe mount

Mounting bracket (wall mount)

Mounting bracket (pipe mount)

Note: If possible, maintain 8–10″(200–250 mm) clearance at the rear of the transmitter.

12 Micro Motion® Model 1700 and 2700 Transmitters