![](/images/new-backgrounds/1062531/6253135x1.webp)
18electrolux
2.Pull the rear shelf support rail away from the side wall and remove it.
2
1
Installing the shelf support rails
Install the shelf support rails in opposite se- quence.
The rounded ends of the shelf support rails must point to the front!
Caution! Make sure that the longer fixing wire is in the front. The ends of the two wires must point to the rear. Incorrect installation can cause damage to the enamel.
CLEANING THE TOP OVEN GLASS PANELS
The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different.
Removing the glass:
1.Open the door.
2.Push the door trim at both sides to re- lease the clips. Refer to the picture.
3.Remove the glass panels.
1
2
1
To replace the glass obey the proce- dure in opposite sequence.
CLEANING THE DOOR GLASS PANELS
The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be different.
Removing the glass:
1.Push the door trim at one side to re- move it. Refer to the picture.
2.Pull up the trim.
3.Remove the glass panels.
A
2
1