20electrolux
INSTALLATION
Warning! Refer to "Safety information" chapter.
TECHNICAL DATA
Dimensions
Height
Width
Depth
Top oven capacity
Main oven capacity
893 – 912 mm
596mm
600mm 40 l 74 l
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with cabinets on one or two sides and in the corner.
B
A
| | A | |
Minimum distances | |
| | |
Dimension | | | mm |
A | | | 2 |
B | | | 685 |
| | | |
LEVELLING
Use small feet on the bottom of appliance to set same level of cooker top surface with other surfaces
THE ANTI-TILT PROTECTION
Caution! You must install the anti-tilt protection (A+B). If you do not install it the appliance can tilt.
Before you install anti-tilt protection, adjust the appliance to the correct height.
The anti-tilt protection has two parts (A+B). You can find the anti-tilt protection (B) on right or left side of the rear wall of the appli- ance (See fig. 1). You must install the anti- tilt protection (A) on the wall. The distance of the hole of the anti-tilt protection (A) from the floor is about 816 mm. Make sure you install the anti-tilt protection (A) at the cor- rect height. Screw it into the solid material or use applicable reinforcement.
Check that the anti-tilt protection projects minimum 20 mm into the hole in the back of the appliance (B) when you push the ap- pliance (See fig. 2). If the space between the bench cupboards is greater than the width of the appliance, you must adjust the side measurement to centre the appliance. Make sure that the surface behind the ap- pliance is smooth.
