THE OVEN LIGHT
The oven light illuminates the oven when the
Selector is turned to .
This is useful for improving visibility when cleaning the oven base.
REPLACING THE OVEN LIGHT BULB
Isolate the cooker from the electricity supply before replacing the bulb.
The type of bulb required is a 300°C, 25 watt small Edison Screw.
1.Make sure the cooker is cool before you replace a bulb.
2.Open the oven door and remove the shelves wirework runners and side panels. Instructions on how to remove the wirework runners are given on page 45.
3.Pull the glass bulb cover towards you and then pull it off. If necessary use a screwdriver to carefully lever off the cover, taking care not to damage the oven cavity.
4.Unscrew the bulb by turning it to the left.
5.Fit a new bulb and then replace the glass bulb cover.
6.Refit the wirework runners, side panels and replace the oven shelves.
7.Restore the cooker to the electricity supply and reset the time of day.
48