Electrolux D4101-5 manual Connecting to the Mains Terminal, Checking Electrical Connections

Page 42

CONNECTING TO THE MAINS TERMINAL

Warning: This appliance must be earthed.

We recommend you use a new length of 6mm2 twin core and earthed cable to ensure your safety.

Make connection as shown in Fig. 7 by proceeding as follows:-

Preform wires to the appropriate shape to suit fitting into the mains terminal block.

Strip inner insulation on wires using wirestrippers.

Twist the bared wires using pliers.

Cut bared wires 10mm away from the end of the

Fig.7

inner insulation. Where uninsulated Earth wires

 

are used ensure they are suitably sheathed to

 

leave 10mm bare wire to fit into the terminal.

 

Clamp bare wires into the relevant terminal and check they are held by tugging each one in turn.

Clamp the mains cable securely ensuring 5mm of the outer insulation is inside the terminal block and that the wires are not taught but not so slack as to cause any fouling. See Fig. 7.

Place fuse/miniature circuit breaker in circuit and switch on at mains.

CHECKING ELECTRICAL CONNECTIONS

Correct electrical connection can be confirmed when switching on the appliance as the timer will be flashing.

NOTE: HOUSE CIRCUIT

Earth leakage and continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

CONNECTING TO A HOB OR COOKER

POINT

Either follow in general terms the instructions for connecting to the terminal block or refer to the hob suppliers installation instructions.

Feed the cable through the cabinet and arrange to route the cable away from the appliance which may become hot.

42

Image 42
Contents Competence D4101-5 Important Safety Information Contents Description of the Appliance BUILT-IN Electric Multifunction Double OvenGetting to Know Your Appliance Control PanelC D EF G H Grill and Oven Furniture Telescopic RunnersBefore Using the Appliance Electronic Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Things to NoteUsing Full Width Dual Grill Full Width Dual GrillGrill PAN and Handles Hints and TipsGrilling Chart FoodUsing Second Oven Second OvenTo FIT the Second Oven Shelf Hints and Tips Second Oven Cooking Chart Second Oven Food Shelf Cooking Approx Position TempcUsing Ventitherm FAN Operated Cooking Ventitherm FAN Operated CookingTo FIT the Main Oven Shelves Using the Telescopic Runners Where fittedUsing Conventional Cooking Conventional CookingHints and Tips Main Oven Cooking Chart Ventitherm FAN Operated Conventional Cooking OvenMeattemperature Roasting ChartInternal Temperatures Cooking TimeUsing the Main Oven Full Width Dual Grill Main Oven Full Width Dual GrillFood Shelf Grill Time Using Pizza PizzaUsing Speedcook SpeedcookCooking Times Using Rotitherm Roasting Rotitherm RoastingRotitherm Roasting Chart Food Shelf TempUsing FAN Controlled Defrosting FAN Controlled DefrostingCleaning the Outside of the Appliance Care and CleaningCleaning Materials Removing and Replacing Wirework RunnersCleaning Inside the Ovens Cleaning the Second and Main Oven RoofCleaning the Doors To Remove the Inner Glass To Clean the Inner Glass Door PanelsCleaning the Grill and Oven Furniture To Replace the Inner Glass PanelReplacing AN Oven Light Bulb Main Oven Replacing AN Oven Light Bulb TOP OvenGrill, ovens and timer do not work Something not WorkingService and Spare Parts Guarantee Conditions European GuaranteeTechnical Details Installation Instructions Do not lift the appliance by the handlesChoice of Electrical Connection Preparing Cabinet for Fitting OvenRecommended Cabinet Dimensions in Millimetres Built In InstallationHOW to Finish Unpacking To Remove Cover of Mains TerminalConnecting to the Mains Terminal Connecting to a HOB or Cooker PointChecking Electrical Connections Fitting Into the Cabinet LU4 9QQ Telephone 0870 5