Electrolux D4100-1 HOW to Finish Unpacking, Tools Required, Making the Electrical Connections

Page 43

HOW TO FINISH UNPACKING

Place packed appliance next to the cabinet in which it will be installed.

Remove the appliance packing except for bottom tray which should be left in position until the appliance is ready to be fitted into its cabinet.

It is imperative that the appliance is left in the base to protect both the appliance and the floor.

Ensure the user is given these operating instructions.

TOOLS REQUIRED

The following tools will be needed and it helps to assemble them before starting to install the oven:-

A terminal screwdriver (3mm wide blade)

A pozidrive screwdriver

Pliers

Wirestrippers

Knife

Sidecutters

Adhesive Tape

Tape Measure

MAKING THE ELECTRICAL CONNECTIONS

Important: Switch off at mains,

miniature circuit breaker and, if appropriate, remove fuse before commencing any electrical work.

PREPARING CABLE

We recommend you use a new length of cable to ensure your safety.

Ensure you have the correct length of cable appropriate to the wiring method you are using. When fitting new cable allow sufficient cable for removal of the unit at a later date, should it be necessary.

Score, but do not cut through, around the sheathing with a knife 100mm (4in) from each end of the cable and break through to the encased wires by bending the cable backwards and forwards to fatigue the sheathing.

Carefully score down from each end of the cable sheathing along the length of the bare earth wire (if a cut was made along the length of the live and neutral wires, it might cut into their sheathing) to the cuts already made.

Carefully prise open the sheathing at each end of the cable to expose the encased wiring.

43

Image 43

Contents Competence D4100-1 Important Safety Information Contents Page Control Panel Getting to Know Your OvenGrill and Oven Furniture Before Using the Oven for the First Time HOW to SET the Countdown Electronic TimerSET the Time of DAY Setting the Oven Timer Control To Cancel the CountdownTo SET the Timer to Switch on and OFF Automatically To SET the Timer to Switch OFF only To Return the Appliance to Manual To Cancel AN Automatic ProgrammeAutomatic Cooking Using the Telescopic Runners Using the GrillDual Grill Hints and Tips Grill PAN and HandleFood Grill Time Grilling ChartSecond Oven Using the Second OvenTo FIT the Second Oven Shelf Hints and Tips Food Shelf Position Cooking Temp C Second Oven Cooking ChartMain FAN Oven Using the Telescopic Runners Conventional Oven Using the Conventional OvenHints and Tips FAN Oven Conventional Oven Cooking ChartMeat SECOND/FAN Cooking Time Oven Roasting ChartRoasting Chart Internal TemperaturesPizza Function Using Pizza FunctionSpeedcook Using SpeedcookCooking Times Thermal Grilling Using Thermal GrillingFood Shelf Temp Thermal Grilling ChartDefrosting Using Defrost FeaturePage Meat Temperatures Helpful Hints When Buying and Preparing FoodRemoving and Replacing Wirework Side Runners Care and CleaningCleaning Materials Cleaning the Outside of the OvenCare of Stayclean Surfaces Cleaning Inside the OvensCleaning the Door Glass To Remove the Inner Glass To Clean the Inner Glass Door PanelsTo Replace the Inner Glass Panel Replacing AN Oven Light Bulb Cleaning the Grill and Oven FurnitureIf Something Doesnt Work ProblemOven light fails to illuminate Customer Care Department Service and Spare PartsSL1 1DZ Standard guarantee conditions Guarantee ConditionsTechnical Details Installation InstructionsChoice of Electrical Connection Do not lift the appliance by the handles Preparing Cabinet for Fitting of OvenCross section Preparing Cable HOW to Finish UnpackingTools Required Making the Electrical ConnectionsTo Remove Cover of Mains Terminal Connecting to a HOB or Cooker Point Connecting to Mains TerminalChecking Electrical Connections Fitting Into the Cabinet T E S AEG Domestic Appliances