Electrolux D4100-1 operating instructions Fitting Into the Cabinet

Page 46

FITTING INTO THE CABINET

IMPORTANT: Ensure that the oven is switched off at the wall before any further work is carried out.

Using a tape measure establish the internal width of the cabinet. Refer to page 41 if greater than 565mm.

Position the appliance in front of the cabinet. See Fig. 8.

Take out all oven furniture before installation to reduce the weight you need to lift. The oven door should be taped up to keep it closed whilst lifting.

To place the appliance into the cabinetry follow the procedure below:

N.B. Two people will be required to carry out the lifting procedure.

Warning: Do not attempt to lift this appliance by the handle(s).

(Cable not supplied)

Fig.8

Each person should squat either side of the appliance.

Tilt the appliance so that your hands can support the underside of the appliance.

Keeping your back straight, raise the appliance to the cabinet by straightening at the knees.

Rest the rear underside of the appliance on the cabinet floor while your hands support the front.

The appliance can be pushed fully into the cabinet. Take care to avoid damaging the mains lead.

Ensure the appliance is central in the cabinet and level.

Do not remove spacer fitted behind fixing holes.

When the appliance is fully housed screw the stability screws (supplied with the appliance) into the side of the cabinet taking care not to distort the side trims (See Fig. 9). It is advisable to turn each screw alternately to avoid

damaging the trims.

Fig.9

Switch on the appliance then refer to the operating instructions.

COMPETENCE D4100-1- 311570607

46

Image 46

Contents Competence D4100-1 Important Safety Information Contents Page Getting to Know Your Oven Control PanelGrill and Oven Furniture Before Using the Oven for the First Time HOW to SET the Countdown Electronic TimerSET the Time of DAY Setting the Oven Timer Control To Cancel the CountdownTo SET the Timer to Switch on and OFF Automatically To SET the Timer to Switch OFF only To Return the Appliance to Manual To Cancel AN Automatic ProgrammeAutomatic Cooking Using the Telescopic Runners Using the GrillDual Grill Grill PAN and Handle Hints and TipsGrilling Chart Food Grill TimeSecond Oven Using the Second OvenTo FIT the Second Oven Shelf Hints and Tips Second Oven Cooking Chart Food Shelf Position Cooking Temp CMain FAN Oven Using the Telescopic Runners Using the Conventional Oven Conventional OvenHints and Tips Oven Cooking Chart FAN Oven ConventionalInternal Temperatures Roasting ChartRoasting Chart Meat SECOND/FAN Cooking Time OvenUsing Pizza Function Pizza FunctionSpeedcook Using SpeedcookCooking Times Using Thermal Grilling Thermal GrillingThermal Grilling Chart Food Shelf TempUsing Defrost Feature DefrostingPage Helpful Hints When Buying and Preparing Food Meat TemperaturesCleaning the Outside of the Oven Care and CleaningCleaning Materials Removing and Replacing Wirework Side RunnersCare of Stayclean Surfaces Cleaning Inside the OvensCleaning the Door Glass To Remove the Inner Glass To Clean the Inner Glass Door PanelsTo Replace the Inner Glass Panel Cleaning the Grill and Oven Furniture Replacing AN Oven Light BulbProblem If Something Doesnt WorkOven light fails to illuminate Customer Care Department Service and Spare PartsSL1 1DZ Guarantee Conditions Standard guarantee conditionsInstallation Instructions Technical DetailsChoice of Electrical Connection Preparing Cabinet for Fitting of Oven Do not lift the appliance by the handlesCross section Making the Electrical Connections HOW to Finish UnpackingTools Required Preparing CableTo Remove Cover of Mains Terminal Connecting to a HOB or Cooker Point Connecting to Mains TerminalChecking Electrical Connections Fitting Into the Cabinet T E S AEG Domestic Appliances