ASSEMBLY & OPERATION
USING THE VARIaBLE POTATO
MASHING LEG
NOTE
If the variable masher leg is already assembled start from step 3.
3.Align the mashing leg with the motor body and push the two parts together until it clicks.
Putting together the potato masher leg
1.Align the tabs on the inner leg, with the slots on the inside of the outer leg. Insert the inner leg until it clicks.
2.Slide the outer leg onto the gear box, matching the Align graphics of both parts. Rotate the outer leg until it clicks and locks into place.
TO USE THE POTATO MASHER LEG
For food preparation tips and recipes refer to the recipes section. Ensure the potato masher is completely and properly assembled.
1.Place food to be mashed into a sufficiently large mixing bowl or container.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.Select the desired setting on the variable mashing leg.
4.Select a high speed on the speed control dial.
5.Place the potato masher into food and press the trigger switch to turn the masher on.
6.Move the masher through the ingredients with a gentle raising and lowering action until desired texture is achieved.
7.Switch off the motor by releasing the trigger switch before lifting the masher out of the bowl. Switch off at the power outlet and remove the power plug.
16