TROUBLESHOOTINGPAge header.....
Problem | Solution |
|
|
Blades don’t turn when | • May be too much food in bowl; reduce quantity. |
processing. | • Pieces of food, such as meat are too large, reduce size. |
| |
|
|
Unable to lock lid | • Spindle may be out of position. Remove lid, straighten |
into place. | spindle as vertical as possible and reposition lid. |
| • Food may be stuck underneath the quad blade |
| preventing the lid from being locked into place. Food |
| such as nuts can be loaded through the feed chute. |
|
|
Gear box in lid jumps out | • Replace gear box and ensure that the control grip is |
of lid when processing. | held vertically and firmly. |
|
|
Masher leg won’t attach | • Ensure mashing leg and gear box arrow graphics are |
onto masher drive. | vertically aligned. Twist masher leg anticlockwise to |
| lock for use. |
|
|
Blades won’t remove | • Potato masher should still be assembled to the gear box |
from potato masher. | assembly and to the unplugged motor body. |
| Rotated clockwise. |
|
|
Grating disc slows down | • Grating has exceeded Max level. Empty bowl and |
when grating. | continue to grate. |
| • Too much force is being used when grating. Reduce |
| force when pushing. |
|
|
Processing bowl does not | • Ensure adjustable slicing disc is set to ‘Storage Position’ |
sit flat onto storage base. |
|
|
|
Motor sounds like | • Speed may not be correct. Refer to processing guide for |
it is not coping with | correct speeds. |
processing load. |
|
|
|
24