ASSEMBLY & OPERATION
TO DETACH THE POTATO
MASHING LEG
Ensure the trigger switch is released, the power is turned off at power point and the appliance is unplugged.
Hold the motor body with one hand, and, using thumb and finger of the other hand, press on the two EJECT buttons on either side of the motor body. Pull the motor body away from the masher to detach.
RECOMMENDATIONS WHEN USING WITH THE POTATO MASHING LEG
•Release the trigger switch and ensure the masher has completely stopped turning before removing the masher from the food during operation.
•Place the mixing bowl on a damp cloth during mashing. This will keep the mixing bowl stable.
USING AS A WHISK
Remove blending leg from motor body (follow the instructions “To detach the blending leg”).
1.Align the whisk gear box to the hole in the underside of the motor body and push the whisk in until it clicks and locks into place.
TO USE THE WHISK
For food preparation tips and recipes refer to the recipes section. Ensure the whisk is completely and properly assembled.
1.Place food to be processed into a blending jug or a sufficiently large mixing bowl or container.
2.Insert the plug into a 230/240V power outlet and turn the power on.
3.Select a speed between
4.Place the whisk into food and press the trigger switch to turn the whisk on.
5.Move the whisk through the ingredients with a gentle raising and lowering action until desired texture is achieved.
6.Switch off the motor by releasing the trigger switch before lifting the whisk out of the bowl. Switch off at the power outlet and remove the power plug.
17