
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. Reattach two flat head screws( 1 ) and two hex head
screws( | 2 ) to the hinge completely. | 12 |
|
| |
|
| 10 |
PU
11
SETTING01
2. Place the hole in the bottom of the door( 3 )over the lower hinge ( 4 )
Be aware not to miss the hinge cap because it can | 12 |
be easily taken off. |
3.Insert the upper hinge shaft( 5 ) into the hole on the corner of the Refrigerator door( 6 ). Make sure the hinge is level between the upper hinge hole( 7 ) and the hole of the cabinet( 8 ) and reattach the hinge screws( 9 ) and
ground screw( 10 ) by turning in a clockwise direction. |
|
Reconnect the wires. | 7 |
8
9 10
5
6
4. Place the front edge of the top table( 11 ) on the front of the upper hinge( 12 ) and reattach with three screws.
11
When reattaching the top table, make sure that the wires are not pressed or damaged by the top table.
12
Setting Up _11
2009.8.10 9:4:11 AM |