Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the
Selecting the best location for the Refrigerator
•A location with easy access to the water supply.
• A location without direct exposure to sunlight. | 2 inch | |
• A location with level (or nearly level) flooring. |
| |
• A location with enough space for the Refrigerator doors to open easily. |
| |
• Allow sufficient space for air circulation of the internal cooling system. |
| |
If the Refrigerator does not have enough space, the internal cooling | 2 inch | |
system may not work properly. | ||
| ||
If your refrigerator has an ice maker, allow extra space at the back for the water line |
| |
connections. When you install the refrigerator next to a fixed wall, minimum clearance is 3 ¾” |
| |
(95mm) between the refrigerator and wall to allow th e door to swing open. |
|
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways (both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
Model | Depth | Width | Height | Overall | Depth | |
“A” | “B” | “C” | Height “D” | “E” | ||
| ||||||
|
|
|
|
|
| |
RF266 | ||||||
RF263 | (83.6cm) | (90.8cm) | (174.4cm) | (177.4cm) | (90.5cm) | |
|
|
|
|
|
|
B
A
C E D
•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.
•Do not install the Refrigerator where the temperature will go below 10 ºC.
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are in the up position (above the floor). Refer to ‘Levelling the refrigerator’ in the manual.
To protect the finish of the flooring, place the protection sheet such as packing carton under the refrigerator.
When installing, servicing or cleaning behind the refrigerator, CAUTION be sure to pull the unit straight out and push back in straight
after finishing.
Control Lever
Screwdriver
8_ Setting Up
2009.8.10 9:4:2 | AM | |
|
|
|