REMOVING THE FREEZER ACCESSORIES
1. Tilting Pocket
To remove - Pull the brackets( 1 ) upward until you hear a clicking sound and remove the pocket
To replace - Hook the ends of the pocket into both brackets ( 1 ) and push down until it locks into place.
1
REPATINGO 02
2. Auto Pull out Drawer
To remove - Pull the drawer out to full extension.
Tilt up rear of drawer and lift straight out.
To relocate - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in.
1 |
2 |
3. Freezer Drawer Bin
To remove the drawer - Pull the drawer out fully.
Tilt up the rear of the bin and lift it out to remove.
To replace the drawer - Place the bin into the rail assembly.
To remove the divider - Pull the divider straight up.
To replace the divider - Hook the top corners of divider over the hole of the bin.
Operating _27
2009.8.10 9:5:4 | AM | |
|
|
|