Wolf WKGX 126623, WKGDX 126624, WKGC 126622 Oven Doors Simultaneous Doors, Assembly Removal

Page 13

FULL SIZE GAS CONVECTION OVENS - REMOVAL AND REPLACEMENT OF PARTS

2. Remove the door switch lever.

8.Reverse procedure to install door assembly and check for proper adjustment as outlined under DOOR ADJUSTMENT and DOOR SWITCH ADJUSTMENT in SERVICE PROCEDURES AND ADJUSTMENTS.

OVEN DOORS

(SIMULTANEOUS DOORS)

Assembly Removal

3.Remove the lower door seal strip to expose the mounting screws of the door assembly.

4.Remove the two (2) lower sill bolts by the lower door shaft and the four (4) counter-sunk screws from the lower sill.

NOTE: The door assembly is heavy and will drop down once the last screw is removed. If removing door assembly with-out assistance, the ignition cable, flame sense lead and gas manifold should also be removed to avoid damage to these components.

5.Tilt the top of the door slightly forward and lift the door up until the bottom of the door shaft clears the opening in the sill.

6.Lay the door flat to prevent damage.

7.The top and bottom bearings are now accessible for inspection and/or replacement if needed.

A.If bearings are ok, proceed to step 8.

B.If replacing the top bearing, remove the top bearing retainer and top bearing.

C.If replacing the bottom bearing, remove it from the door shaft or the lower sill opening.

WARNING: DISCONNECT THE

ELECTRICAL POWER TO THE

MACHINE AND FOLLOW LOCKOUT /

TAGOUT PROCEDURES.

1.Remove the top front cover and bottom front cover as outlined under COVERS AND PANELS.

2.Remove the door switch lever.

3.Remove the top bearing retainers and top bearings.

4.Remove the lower door seal strip to expose the mounting screws of the door assembly.

A.Remove the two (2) lower sill bolts by the lower door shaft and the four (4) counter-sunk screws from the lower sill.

Page 13 of 64		F32700 (February 2006)

Image 13

Contents WKG Series Full Size GAS Convection Ovens Table of Contents Computer Control Models Only Specifications Installation Operation Cleaning LubricationIntroduction ToolsTop Front Cover Covers and PanelsBottom Front Cover Control PanelControl Panel Components Removable Components ProcedureComponent Panel Components GAS Burner Temperature Probe WKGD/WKGDXGAS Solenoid Valve GAS OrificeSpark Igniter Flame Sense Ignition Control ModuleBlower and Motor Oven Doors and Bearings Independent Doors Oven Doors Simultaneous Doors Assembly RemovalDisassembly Door Catch Ball Assembly Independent DoorsDoor Window Door Switch Interior Lights High Limit ThermostatLamp Cooling FAN Lamp AssemblySolid State Temperature Control Calibration WKGD/WKGDX Service Procedures and AdjustmentsMechanical Thermostat Calibration WKG/WKGX Solid State TemperatureTemperature Probe Test WKGD/WKGDX Temperature Probe Test WKGD/WKGDXTemp F Ohms GAS Pressure AdjustmentVerification of Spark AT Ignitor Door Switch AdjustmentBlower Adjustment Door Catch Ball Adjustment Independent Doors Door AdjustmentIntroduction ProcedureComputer Control WKGC/WKGCX Operation Setup ModeProbe Test Computer Control Calibration WKGC/WKGCXSolid State Relay Test Door Switch Function Switch S3Component Function Blower Motor Solid State Temperature ControlMotor Speed Relay R1 Computer ControlMechanical Temperature Control Temperature ProbeComponent Location Gas Valve Dual SolenoidWKG/WKGX Plug, Socket and Components Standard Controls WKGD/WKGDX Plug, Socket and Components Standard Controls Full Size GAS Convection Ovens Electrical Operation WKGC/WKGCX Plug, Socket and Components Roast & Hold Standard WKG, Wkgx With Roast & Hold Option Mechanical KX Thermostat Sequence of OperationNormal Roast Cycle Roast and Hold Cycle Timer Cycle Normal Roast CookingFull Size GAS Convection Ovens Electrical Operation Timer Cycle Roast & Hold Cooking WKGD, Wkgdx With Roast & Hold Option Solid State Temperature ControlTimer Cycle Normal Roast Cooking Roast and Hold Cycle Timer Cycle Roast & Hold Cooking Oven Cool Cycle Solid State Temperature Control Roast Cycle Normal Cooking Roast & Hold Standard on Computer ModelFull Size GAS Convection Ovens Electrical Operation Oven Cool Cycle Computer Control Model Temperature and Time Cycle CookingWKG, Wkgx Mechanical KX Controls SchematicsWKG, Wkgx Mechanical KX Controls, Roast & Hold Option WKGD, Wkgdx Solid State Temperature Control Full Size GAS Convection Ovens Electrical Operation WKGC, Wkgcx Computer Control Roast & Hold Standard Wiring Diagrams Full Size GAS Convection Ovens Electrical Operation WKG, Wkgx Mechanical KX Controls, Roast & Hold Option Full Size GAS Convection Ovens Electrical Operation WKGD, Wkgdx Solid State Temperature Control Full Size GAS Convection Ovens Electrical Operation Full Size GAS Convection Ovens Electrical Operation Full Size GAS Convection Ovens Electrical Operation WKGC, Wkgcx Computer Control Roast & Hold Standard Full Size GAS Convection Ovens Electrical Operation ALL Models TroubleshootingComputer Control Models only Error CodesDescription Condensed Spare Parts List