Surface Cooking
Operating the Single Front or Rear Element
Push in and turn the corresponding control knob counterclockwise to the desired setting. The element will cycle on and off to maintain the desired heat setting. When finished, turn all controls OFF.
Operating the Rear and Bridge Element
Push in and turn the corresponding control knob clockwise to desired setting. The rear element and bridge element will cycle on and off to main- tain the desired heat setting. When finished, turn all controls to OFF.
Hot Surface Indicator Lights for Radiant Elements
The cooktop has hot surface indicator lights. They are located on the front of the glass cooktop. The hot surface indicator light will glow red when the corresponding element is turned on. The light will remain on until the cor- responding element has cooled to a safe temperature.
Induction LED Display
The LED display for each induction element is used for both on/off and hot surface warning.
| LED Display |
| Description |
|
| No Display | Unit off with cool surface |
| |
| Continuous | Unit on and cooking |
| |
| Display |
|
|
|
| Flashing | 1. | Unit off with hot surface |
|
|
| 2. | Unit on without cookware on surface- |
|
|
|
| Use proper cookware |
|
|
| 3. | Unit on with cookware too small for cooking surface- |
|
|
|
| Use larger cookware or move to smaller element |
|
|
| 4. | Unit on with correct size cookware for element- |
|
|
|
| Incompatible cookware for induction - refer to page 5 |
|
|
|
| for suitable cookware. |
|
|
|
|
|
|
NOTE: If flashing continues after making adjustments according to the flash- ing descriptions above, call a service technician and refer to the in- ternal error codes on next page.
Internal Error Codes
| LED Indicators | Description |
| |
| (1) | Flash with brief interval between | Internal power device over temp. |
|
| (3) | Consecutive flashes | Internal power device malfunction |
|
|
| with brief interval between |
|
|
| (5) | Consecutive flashes | Power device temperature sensor |
|
|
| with brief interval between | malfunction |
|
| (6) | Consecutive flashes | Coil temperature sensor |
|
|
| with brief interval between | malfunction |
|
| (8) | Consecutive flashes | Inside ambient temperature too |
|
|
| with brief interval between | high |
|
| (9) | Consecutive Flashes | Incompatible cookware for |
|
|
| with brief interval between | induction |
|
|
|
|
|
|
Surface Layout
INDUCTION
HOT |
|
|
| HOT |
INDUCTION | ||||
REAR |
|
|
| REAR |
| ||||
FRONT |
|
|
| FRONT |
30” W. Radiant / Induction Cooktop
6 | 7 |