OPERATING your Breville Duo-Temp™ espresso machine
WARNING
The metal parts of the filter holder might still be very hot. Cool these parts in cold water.
NOTE
When the BES800XL is creating steam a pulsing noise can be heard. This is the normal operation of the 15 Bar pump.
•When the red ‘Heating’ light stops flashing, quickly insert the Steam Wand into the jug of milk so that the Froth Attachment is just immersed into the milk.
NOTE
If steam starts coming from the Steam Wand before it is immersed in the milk, pause the steam by turning the Selector Control back to the ‘Standby’ position. This will avoid the steam pressure blowing milk out of the jug. A pumping noise will sound for a short time.
•Hold the frothing jug at an angle so that the Frothing Attachment sits just below the surface of the heating milk and the steam will move the milk around the inside of the jug in a circular motion.
NOTE
The BES800XL features a Swivel Steam Wand assembly so the position of the Steam Wand can be changed to a comfortable angle.
•When the milk starts to increase in volume, immerse the Frothing Attachment deeper into the jug to heat the milk.
•Hold the jug at an angle with one hand and place your other hand on the outer base of the stainless frothing jug.
•When the base of the jug becomes too hot to touch, set the Selector Control to the ‘Standby’ position, stopping the steaming function before removing the jug. A pumping noise will sound for a short time.
•Pour the steamed milk into each cup of freshly brewed espresso coffee and spoon in the frothed milk, in the following ratios: Cappuccino - L espresso, L steamed milk, L frothed milk Latté - L espresso topped with steamed milk and about ¼ inch (1cm) of frothed milk (traditionally served in a glass).
19