USING YOUR PROFESSIONAL JUICER
EMPTYING THE PULP COLLECTOR
Always check the level of juice in the Juice Collector Jug. Do not overfill, as juice will continue to drip from the juice outlet after you have stopped juicing. Switch off the appliance and allow the dripping to stop before removing the Juice Collector Jug.
When the Pulp Collector starts getting full, switch off the appliance, empty the Pulp Collector.
Hold the Pulp Collector, tilt (1) the Pulp Collector a bit and move it away (2) from the appliance, as shown below.
NOTE: Take care not to spill content in the Pulp Collector when tilting.
To refit, place back onto the rear of the Motor Base. Ensure that the lug on the bottom of the Pulp Collector fits into the slot at the rear of the Motor Base.
10
JE16_New.pmd | 10 | 3/24/2006, 4:17 PM |