KitchenAid W10291426A manual Classic Series Custom Panels, Top Grille Panel, Model a

Classic Series Custom Panels

If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinetmaker or carpenter. See dimension drawings for panel specifications.

IMPORTANT: Panels weighing more than recommended may cause damage to your refrigerator.

NOTE: Dimensions shown have a (±)¹⁄₁₆" (1.5 mm) tolerance. Panels that are more than ¹⁄₄" (6.35 mm) thick must be routed. If panels are less than ¹⁄₄" (6.35 mm) thick, install a filler panel between the doors and decorative panels.

Top Grille Panel

The top grille panel should not weigh more than 10 lbs (4.5 kg).

NOTE: The dashed lines in the illustration represent the location and offsets of raised wood panel.

NOTES:

■If the standard handle is used, the handle side offset of both panels should be 3¹⁄₄" (8.25 cm) to all for finger clearance.

■If an extended handle is used, the handle side offset of both panels should be ⁷⁄₁₆" (1.1 cm). Make sure the refrigerator location allows the doors with extended handles to open to 90 degrees. See “Door Swing Dimensions.”

■The dashed lines in the illustration represent the location and offsets of raised wood panel.

Door Panels for Dispenser Models

The freezer panel should not weigh more than 40 lbs (18.1 kg).

A

7" (17.78 cm)

¹⁄₄" thick	Top & Bottom Offsets
	¹¹⁄₁₆" (1.75 cm)
plywood

Model A

3634¹⁄₄" (87.0 cm)

4240¹⁄₄" (102.2 cm)

4846¹⁄₄" (117.5 cm)

Side Offsets ⁷⁄₁₆" (1.11 cm)

The refrigerator panel should not weigh more than 50 lbs (23 kg).

			A		B
	¹⁄₂"					¹⁄₂"
(1.27 cm)						(1.27 cm)
¹⁄₄" thick		Freezer		Refrigerator
		Door			Door
plywood
		(Dispenser)
							⁷⁄₁₆"
							(1.1 cm)
14¹⁄₄"

Door Panels for Non-dispenser Models

The freezer panel should not weigh more than 40 lbs (18.1 kg). The refrigerator panel should not weigh more than 50 lbs (23 kg).

(36.2 cm)		10⁷⁄₈"
	(27.6 cm)
			70⁷⁄₁₆"
			(178.9 cm)

A B

Dispenser cutout is centered

¹⁄₄" thick plywood

¹⁄₂"

(1.27 cm)

Freezer

Door

(Non-Dispenser)

Refrigerator

Door

¹⁄₂"

(1.27 cm)

⁷⁄₁₆"

left-to-right

33³⁄₄"

(85.7 cm)

3¹⁄₄"

(8.3 cm)

3¹⁄₄"

(8.3 cm)

₄" thick ywood

3¹⁄₄"

(8.3 cm)

70⁷⁄₁₆"

(178.9 cm)

3¹⁄₄"

(8.3 cm)

(1.1 cm)

¹⁄₄" thick plywood

⁷⁄₁₆"			Location and offsets
(1.1 cm)		¹⁄₂"			¹⁄₂"
		(1.27 cm) of raised wood panel			(1.27 cm)
	Model	A		B
	36	14¹⁄₄" (36.2 cm)		19¹⁄₄" (48.9 cm)
	42	16³⁄₄" (42.6 cm)		22³⁄₄" (57.8 cm)
	48	19¹⁄₄" (48.9 cm)		26¹⁄₄" (66.7 cm)

NOTES:

■ Dispenser cutout is centered left-to-right.

■ If the standard handle is used, the handle side offset of

both panels should be 3¹⁄₄" (8.25 cm) to all for finger

clearance.

■ If an extended handle is used, the handle side offset of

both panels should be ⁷⁄₁₆" (1.1 cm). Make sure the

⁷⁄₁₆"				Location and offsets
(1.1 cm)			¹⁄₂"			¹⁄₂"
		(1.27 cm) of raised wood panel				(1.27 cm)
	Model		A		B
	36		14¹⁄₄" (36.2 cm)		19¹⁄₄" (48.9 cm)
	42		16³⁄₄" (42.6 cm)		22³⁄₄" (57.8 cm)
	48		19¹⁄₄" (48.9 cm)		26¹⁄₄" (66.7 cm)

refrigerator location allows the doors with extended

handles to open to 90 degrees. See “Door Swing

Dimensions.”

■ The dashed lines in the illustration represent the location

and offsets of raised wood panel.

16