KitchenAid W10291426A manual Overlay Panel, Overlay Series Door Panel and Cabinetry Clearance

Overlay Series Door Panel and Cabinetry Clearance

The custom door panels and adjacent cabinetry must be designed so that there is sufficient clearance for the doors to swing open. If the refrigerator is to be installed close to the wall, see “Door Swing 90°” on next page.

Door Swing 110˚

Actual Size

Refrigerator to

Cabinetry Clearance

Refrigerator

Side Trim

11/2"

(3.8 cm)

11/4"

(3.2 cm)

1"

(2.5 cm)

NOTE: For Overlay Series models, rout the hinge side of the custom door panels to a radius that is equal to at least half the thickness of the panel if a 130˚ door swing is desired. See “Adjust Doors.”

Hinge

Door

Cabinetry

1/4" (6.35 mm)

1/2" (1.3 cm)

3/4" (1.9 cm)

1" (2.5 cm)

1/2"					NOTE: Allow ¹⁄₂"
					(1.3 cm) clearance
(1.3 cm)					between overlay
			3/4"		panel and cabinetry.
		(1.9 cm)
		1"
				(2.5 cm)
Backer	Overlay				11/4"
					(3.2 cm)
					11/2"
			Panel
Panel					(3.8 cm)

Spacer Panel

When the doors are closed the refrigerator will extend beyond the face of the adjacent cabinetry to some degree.

11