KitchenAid KTRC22KVSS installation instructions Refrigerator Doors

Page 5

A

B

A.Bulb

B.Nut (provided)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

2.Pull handle straight out from the door. Make sure you keep screws for reattaching handles.

Remove Doors and Hinges (all models)

IMPORTANT:

■Unplug refrigerator or disconnect power.

■Remove food and any adjustable door or utility bins from doors.

■If you are only removing and replacing the doors, the instructions are the same regardless of door style.

■If you have a standard or contour door and are also going to reverse the door swing, follow the instructions for the appropriate door style.

■All graphics referenced in the following instructions are included later in this section after “Final Steps.”

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Water Dispenser.”

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

Refrigerator Doors

Standard

Contour

Architect® Series

Remove Handle (Architect® Series)

Graphics are included later in this section.

NOTE: These instructions are for the Architect® Series doors with curved handle only.

1.Using a ¹⁄₈" Allen wrench, loosen the two setscrews located underneath each handle.

⁵⁄₁₆" Hex-Head Hinge Screw

TOOLS NEEDED: ⁵⁄₁₆" hex-head socket wrench, #2 Phillips screwdriver, flat-blade screwdriver, ⁵⁄₁₆" open-end wrench, flat 2" putty knife.

1.Unplug refrigerator or disconnect power.

2.Open refrigerator door and remove base grille from the bottom front of the refrigerator. See Base Grille graphic.

3.Close the refrigerator door and keep both doors closed until you are ready to lift them free from the cabinet.

NOTE: Provide additional support for the doors while the hinges are being moved. Do not depend on the door magnets to hold the doors in place while you are working.

4.Remove the parts for the top hinge as shown in Top Hinge graphic. Lift the freezer door free from the cabinet.

5.Remove the parts for the center hinge as shown in the Center Hinge graphic. Lift the refrigerator door free from the cabinet.

6.Remove the parts for the bottom hinge as shown in the Bottom Hinge graphic.

Reverse Doors (optional on some models)

IMPORTANT:

■Architect® Series doors with curved handle are not reversible.

■If you want to reverse your standard or contour doors so they open from the opposite side, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges” later in this section.

Standard Door

Graphics are included later in this section.

Door Stop Screw

Door Hinge Hole Plug

Door Handle Sealing Screw

Cabinet Hinge Hole Plug

Flat-Head Handle Screw

Round-Head Handle Screw

Door Handle Seal Screw Front

Shoulder Handle Screw

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Refrigerator User Instructions Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Before You Throw Away Your Old Refrigerator or FreezerElectrical Requirements Location RequirementsWater Supply Requirements Recommended Grounding MethodReverse Osmosis Water Supply Connect the Water SupplyConnect to Water Line Connect to Refrigerator StyleRefrigerator Doors Final Steps Contour DoorReplace Doors and Hinges Standard Door Removal ReplacementContour Door Swing Reversal optionalArchitect Series Using the Controls Adjust the DoorsRefrigerator USE Crisper Humidity ControlRefrigerator Care CleaningWater Filtration System Water DispenserRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureWater Filter Certifications AccessoriesWater dispenser will not operate properly Water is leaking from the dispenser system15 mg/L † Product Data SheetsModel WF-NL120VChange the water filter every Application Guidelines/Water Supply ParametersModel WF-NLC120V Capacity 120 Gallons 454 Liters Limited Warranty Kitchenaid Refrigerator WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Excluded from WarrantySeguridad DEL Refrigerador Instrucciones Para EL Usuario DEL RefrigeradorDesempaque el refrigerador Instrucciones DE InstalaciónRequisitos de ubicación Quite los materiales de empaqueRequisitos del suministro de agua Requisitos eléctricosMétodo de conexión a tierra recomendado Presión del aguaConexión al refrigerador Estilo Conexión del suministro de aguaConexión a la línea de agua Cómo terminar la instalación Puertas del refrigeradorCómo quitar la manija Serie Architect Cómo quitar las puertas y las bisagras todos los modelosPuerta contorneada Puerta EstándarPasos finales Cómo volver a poner la puerta y las bisagras en su lugarEstándar Cambio del sentido de apertura de las puertas opcionalContorneada Cambio del sentido de apertura de las puertas opcionalSerie Architect Uso de los controles USO DE SU RefrigeradorAjuste las puertas Fábrica de hielo Control de humedad del cajón para VerdurasDespachador de agua Sistema de filtración de aguaLimpieza Cuidado DE SU RefrigeradorCómo cambiar los focos Uso del despachador sin el filtro de aguaFuncionamiento del refrigerador Solución DE ProblemasHielo y agua Temperatura y humedadEl despachador de agua no funciona debidamente AccesoriosEl agua gotea del sistema del despachador El agua del despachador está tibiaPautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoModelo WF-NLC120V Capacidad de 120 galones 454 litros Garantía Limitada Garantía DEL Refrigerador DE KitchenaidSécurité DU Réfrigérateur Instructions Dutilisation DU RéfrigérateurExigences demplacement Instructions DinstallationDéballage du réfrigérateur Retirer les matériaux d’emballageSpécifications électriques Méthode recommandée de mise à la terreSpécifications de l’alimentation en eau Pression de leauRaccordement au réfrigérateur Style Raccordement de la canalisation deauRaccordement à la canalisation d’eau Portes du réfrigérateur Achever l’installationEnlèvement de la poignée Série Architect Enlèvement des portes et des charnières tous modèlesPorte Contour Porte standardÉtapes finales Réinstallation des portes et des charnièresDémontage et réinstallation de la porte Inversion douverture de la porte option Série Architect Ajustement des portes Utilisation des commandesUtilisation DU Réfrigérateur Distributeur d’eau Réglage de lhumidité dans le bac à légumesMachine à glaçons Nettoyage Entretien DU RéfrigérateurSystème de filtration de leau Fonctionnement du réfrigérateur Remplacement des ampoules d’éclairageDépannage Glaçons et eau Température et humiditéAccessoires Le produit ne doit être utilisé que pour l’eau froide Feuilles DE Données SUR LE ProduitModèle WF-NLC120V Capacité 120 gallons 454 litres Éléments Exclus DE LA Garantie Garantie DU Réfrigérateur KitchenaidGarantie Limitée All rights reserved W10208837A EN/FR PN W10208838A

KTRC22KVSS specifications

The KitchenAid KTRC22KVSS refrigerator stands out as a robust and stylish addition to any modern kitchen. With its sleek stainless steel exterior, this model not only offers functional benefits but also elevates the aesthetic appeal of your space. Designed with precision and user convenience in mind, the KTRC22KVSS combines innovative technologies and thoughtful features that cater to the needs of contemporary households.

One of the standout features of the KTRC22KVSS is its impressive temperature management system. Equipped with a state-of-the-art cooling system that ensures consistent temperatures throughout the refrigerator and freezer compartments, this model minimizes temperature fluctuations that can impact food quality. The ExtendFresh Temperature Management System uses advanced sensors to regulate temperature and humidity, creating an ideal environment for produce and other perishables.

The refrigerator boasts a generous capacity of 21.9 cubic feet, providing ample space for groceries, leftovers, and beverages. Its interior is thoughtfully designed with adjustable shelves, allowing for flexibility when organizing items of various sizes. The glass shelves offer easy visibility and quick access to your food items, while the humidity-controlled crisper drawers keep fruits and vegetables fresh for longer periods.

In terms of organization, the KTRC22KVSS features a specialized dairy compartment and door bins that can accommodate taller bottles, ensuring everything stays in its place. The Spill-Catcher shelves not only contain spills for easy cleanup but also help to prevent cross-contamination.

In addition to its robust storage capabilities, the KitchenAid KTRC22KVSS incorporates energy-efficient technologies. Energy Star certified, it helps reduce energy consumption without sacrificing performance. The refrigerator also includes LED lighting that illuminates the interior while using less energy than traditional lighting options.

Furthermore, the exterior of the refrigerator is equipped with prints resistant finish, which makes cleaning a breeze and helps maintain a spotless appearance even in the busiest kitchens.

In summary, the KitchenAid KTRC22KVSS refrigerator is a notable choice for those seeking a blend of style, functionality, and innovative technology. With features such as advanced cooling systems, customizable storage options, and energy efficiency, it is designed to meet the demands of modern lifestyles while keeping food fresher longer.
Top Page Image Contents