Important Safety Instructions

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

■Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

■Before servicing or cleaning the unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

■Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

■Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and safety standards such as those published by the National Fire Protection Association (NFPA), the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

■When cutting or drilling into wall or ceiling; do not damage electrical wiring and other utilities.

■Ducted fans must always be vented outdoors. CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors. CAUTION: To reduce risk of fire and to properly exhaust air, be sure to duct air outside - do not vent exhaust air into spaces within walls or ceilings, attics or into crawl spaces, or garages.

WARNING: TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK.

WARNING: TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

■Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers that may ignite. Heat oils slowly on low or medium settings.

■Always turn hood ON when cooking at high heat or when flambeing food (i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambé).

■Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter.

■Use proper pan size. Always use cookware appropriate for the size of the surface element.

WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:a

■SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

■NEVER PICK UP A FLAMING PAN - you may be burned.

■DO NOT USE WATER, including wet dishcloths or towels - a violent steam explosion will result.

■Use an extinguisher ONLY if:

–You know you have a class ABC extinguisher, and you already know how to operate it.

–The fire is small and contained in the area where it started.

–The fire department is being called.

–You can fight the fire with your back to an exit.

aBased on "Kitchen Fire Safety Tips" published by NFPA.

■WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device.

READ AND SAVE THESE INSTRUCTIONS

W10268948C specifications

The KitchenAid W10268948C is an innovative replacement water filter designed specifically for certain KitchenAid refrigerators. This water filter provides consumers with clean and refreshing water right from their appliances, ensuring that families can enjoy healthier hydration and better-tasting beverages.

One of the main features of the W10268948C is its advanced filtration technology. The filter effectively reduces a wide range of contaminants found in tap water, including chlorine, lead, and sediment, ensuring that the water remains pure and safe for daily consumption. This is especially important for households that rely heavily on filtered water for cooking and drinking.

The installation process for the W10268948C is straightforward, allowing users to easily replace their old filter without requiring professional assistance. Its design features a simple twist-and-lock mechanism that ensures a secure fit, minimizing the risk of leaks. Users can expect enhanced performance with each new filter, which translates to optimal water quality and taste.

Another noteworthy characteristic is the longevity of the filter. The W10268948C typically has a lifespan of up to six months or approximately 200 gallons, depending on the water quality and usage within the household. This endurance allows for a more extended period between replacements, providing convenience and peace of mind to busy families.

Additionally, the filter is certified by various third-party organizations, assuring consumers of its performance and safety standards. This certification adds a layer of credibility to its claims, making it a trusted choice among users.

Moreover, the W10268948C is environmentally friendly, as it minimizes plastic waste by ensuring that users have access to clean water at home, reducing the need for bottled water. This contributes positively to environmental conservation.

In conclusion, the KitchenAid W10268948C stands out as an efficient water filter that emphasizes safety, convenience, and sustainability. With its advanced filtration technology, easy installation process, long lifespan, and reliable performance, it remains a top choice for homeowners seeking to enhance the quality of their drinking water. Investing in this filter is a step toward healthier living and sustainable practices in the kitchen.