KitchenAid 4329223, 4360369 installation instructions Parts needed, Parts supplied, Tools needed

Page 2

Before you start...

Your safety and the safety of

others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill

or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”. These words mean:

DANGER

You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Important: Observe all governing codes and ordinances.

Proper installation is your responsibility:

WARNING — TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable Codes and Standards, including Fire Rated Construction. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

WARNING — To reduce the risk of fire, use only metal ductwork.

This unit must be grounded.

Parts needed:

2 U.L.- or C.S.A.- listed, 1/2" (12.5 mm) conduit connectors

power supply cable 1 wall or roof cap metal vent system

Parts supplied:

 

 

8 trim

support

 

clips

6 screws mounting

support

bracket

system

 

upper

 

 

chimney

 

 

trim

 

mounting

 

 

 

 

template

upper

 

upper

 

chimney

chimney

trim

lower

 

 

chimney

 

lower

 

lower

chimney

 

 

chimney

trim

 

 

trim

 

 

damper

canopy

Have a qualified technician install this range hood.

Comply with installation clearances specified on the model/serial rating plate.

Model/serial rating plate is located inside the range hood on the rear wall.

Island canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Grounded electrical outlet is required.

See “Electrical requirements.”

Note: The island canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) installations see “Non- Vented (Recirculating) Kits” on the back page.

All openings in ceiling and wall where range hood will be installed must be sealed.

Tools needed:

level

drill

caulking gun and weatherproof caulking compound

1-1/4" drill bit

pencil

pliers

duct tape

measuring

tape or rulermetal snips

wire stripper or utility knife

allen wrench set

saber or keyhole saw

flat-blade screwdriver

Phillips screwdriver

2

Image 2
Contents Installation Instructions Use and Care Guide Quick ReferenceParts supplied Your safety and the safety Others is very importantParts needed Tools neededFor the most efficient and quiet operation Product dimensionsVenting requirements Venting methods Calculating the vent system lengthElectrical requirements Installation stepsInstallation PreparationElectrical connection Excessive Weight Hazard Disconnect power supply Concrete ceiling use inserts and screws providedInstall chimney sections Check operationOperation CleaningUse and Care Information Utensil Bar Wiring diagram AccessoriesMaintenance Charcoal FiltersKitchenAid will not PAY for WarrantyKitchenAid will PAY for Requesting Assistance or Service Our consultants provide assistance with807 area code in Ontario Direct service branchesExcept 807 area code Référence rapide PagesOutillage nécessaire Pièces nécessairesPièces fournies Votre sécurité et celle des autres Est très importanteDimensions du produit Dimensions des placards Circuit de décharge de l’airCalcul de la longueur effective du système de décharge Décharge horizontale à travers le murAlimentation électrique Les étapes de l’installationInstallation Préparation Interrompre l’alimentation électrique Plafond de bois utiliser des vis à bois de 10,2 cm 4 po12.Exécution des raccordements électriques Vis Mm 1/4 poHotte Mettre le système sous tensionContrôler le fonctionnement de la Utilisation de la hotte Fermeture du logement des organes de commandeRenseignements d’utilisation et entretien NettoyageSchéma de câblage AccessoiresEntretien Filtres au charbonKitchenAid Paiera GarantieGarantie de la hotte d’aspiration KitchenAid KitchenAid NE Paiera PASSi vous avez besoin de pièces de rechange Demande dassistance ou de serviceSi vous avez besoin dassistance ou de service aux É.-U Pour plus dassistancePour plus d’assistance Demande d’assistance ou de serviceSi vous avez besoin dassistance ou de service au Canada 30 et 18 h 00 HNE, en composant

4360369, 4329223 specifications

The KitchenAid 4329223 and 4360369 stand as two prominent models in the KitchenAid lineup, recognized for their exceptional performance and reliability in home cooking and baking. These stand mixers showcase the brand’s commitment to quality, durability, and innovative technology, making them essential kitchen companions for both amateur cooks and seasoned chefs.

The KitchenAid 4329223 model features a robust 325-watt motor, enabling it to handle a wide range of tasks, from kneading tough bread dough to whipping delicate meringue. The mixer is equipped with a 10-speed control, offering precision and versatility. Users can easily adjust the speed for different recipes, ensuring optimal mixing for every ingredient. This flexibility allows for improved results whether you are blending thick batters, aerating egg whites, or mixing cookie dough.

On the other hand, the KitchenAid 4360369 is designed with a powerful 400-watt motor, providing extra strength for heavier mixtures. This model comes with a bowl-lift design, facilitating easy access to the mixing bowl and making it ideal for large batches. The sturdy construction of the 4360369 enhances stability during operation, allowing users to mix without the worry of the machine moving around the countertop.

Both models are equipped with the iconic planetary mixing action, which ensures that all ingredients are mixed thoroughly. The mixing attachment rotates in one direction while the bowl spins in the opposite direction, covering every corner of the bowl and ensuring consistent blending. Additionally, these mixers come with a variety of included attachments, such as the flat beater, dough hook, and wire whip, enabling users to tackle an array of culinary tasks.

The design aesthetics of both models also warrant mention. With a classic yet modern look, they feature a sturdy stainless-steel bowl that is both durable and easy to clean. Available in a variety of colors, these mixers not only perform exceptionally but also enhance the décor of any kitchen.

Overall, the KitchenAid 4329223 and 4360369 represent the best of technology, design, and functionality, catering to the needs of anyone looking to elevate their culinary skills. With their reliable performance and versatile features, these mixers make cooking and baking an enjoyable and efficient experience.