KitchenAid 4329223 Electrical connection, Concrete ceiling use inserts and screws provided

Page 6

7. Align support mounting bracket with holes in ceiling. Attach support system frame to ceiling using anchors recommended for your type of ceiling:

•Concrete ceiling — use inserts and screws provided.

•Wood ceiling — use 4" (10.2 cm) long wood screws.

•Plaster or sheet rock ceiling — attach support mounting bracket to ceiling joists if possible. If ceiling joists are not available, you must build a supporting structure behind the plaster or sheet rock.

Make sure the support is connected firmly to ceiling.

.

10. Remove the terminal box cover from the range hood. Remove the power supply cable knockout using a flat-blade screwdriver. Do not remove optional remote blower knockout. Attach conduit connector into power supply cable opening so that conduit connector clamping screws are inside the terminal box.

WARNING

Excessive Weight Hazard

Use two or more people to move and install island canopy hood.

Failure to do so can result in back or other injury.

Electrical connection

WARNING

Electrical Shock Hazard

Disconnect power before making electrical connections.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death or electrical shock.

12.Make electrical connection:

four set

 

screws

slot

 

 Disconnect power supply.

 Feed enough power supply cable

through conduit connector to

make electrical connections.

 Connect the power supply cable to

hood terminal box through the

U.L.- or C.S.A.-listed conduit

8. Determine the height of the canopy. The range hood requires at least 24" (61 cm) of clearance between bottom of range hood canopy and cooking surface.

The bottom of the canopy will be approximately 9" (22.9 cm) below the bottom of the support system. To change the canopy height, loosen the four set screws on the support frame. Adjust support frame to the desired length and tighten all four set screws firmly in place before attaching canopy.

If used, attach the vent damper to the inside bottom of the chimney support frame. Make sure damper opens to outside.

9. Press on handle in front of filters to release filters from range hood canopy. Remove filters and set aside.

6

bolt

1/4" (6.4 mm)

11. Loosen four bolts located next to exhaust opening so that there is approximately 1/4" (6.4 mm) space between bolt head and canopy. Lift canopy and insert bolts into slots in support system frame. Tighten bolts to support system frame and canopy.

connector.

 Connect the white wire of the

power supply cable with the white

lead in the hood using a twist-on

connector; connect the black wire

of the power supply cable with the

black lead in the hood using a

twist-on connector.

 Connect the power supply green

(green and yellow) ground wire

under the green, ground screw.

 Tighten conduit connector screws.

 Replace the terminal box cover.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Use and Care Guide Quick ReferenceParts supplied Your safety and the safety Others is very importantParts needed Tools neededProduct dimensions Venting requirementsFor the most efficient and quiet operation Venting methods Calculating the vent system lengthElectrical requirements Installation stepsInstallation PreparationElectrical connection Excessive Weight Hazard Disconnect power supply Concrete ceiling use inserts and screws providedInstall chimney sections Check operationCleaning Use and Care InformationOperation Utensil Bar Wiring diagram AccessoriesMaintenance Charcoal FiltersWarranty KitchenAid will PAY forKitchenAid will not PAY for Requesting Assistance or Service Our consultants provide assistance withDirect service branches Except 807 area code807 area code in Ontario Référence rapide PagesOutillage nécessaire Pièces nécessairesPièces fournies Votre sécurité et celle des autres Est très importanteDimensions du produit Dimensions des placards Circuit de décharge de l’airCalcul de la longueur effective du système de décharge Décharge horizontale à travers le murAlimentation électrique Les étapes de l’installationInstallation Préparation Interrompre l’alimentation électrique Plafond de bois utiliser des vis à bois de 10,2 cm 4 po12.Exécution des raccordements électriques Vis Mm 1/4 poMettre le système sous tension Contrôler le fonctionnement de laHotte Utilisation de la hotte Fermeture du logement des organes de commandeRenseignements d’utilisation et entretien NettoyageSchéma de câblage AccessoiresEntretien Filtres au charbonKitchenAid Paiera GarantieGarantie de la hotte d’aspiration KitchenAid KitchenAid NE Paiera PASSi vous avez besoin de pièces de rechange Demande dassistance ou de serviceSi vous avez besoin dassistance ou de service aux É.-U Pour plus dassistancePour plus d’assistance Demande d’assistance ou de serviceSi vous avez besoin dassistance ou de service au Canada 30 et 18 h 00 HNE, en composant

4360369, 4329223 specifications

The KitchenAid 4329223 and 4360369 stand as two prominent models in the KitchenAid lineup, recognized for their exceptional performance and reliability in home cooking and baking. These stand mixers showcase the brand’s commitment to quality, durability, and innovative technology, making them essential kitchen companions for both amateur cooks and seasoned chefs.

The KitchenAid 4329223 model features a robust 325-watt motor, enabling it to handle a wide range of tasks, from kneading tough bread dough to whipping delicate meringue. The mixer is equipped with a 10-speed control, offering precision and versatility. Users can easily adjust the speed for different recipes, ensuring optimal mixing for every ingredient. This flexibility allows for improved results whether you are blending thick batters, aerating egg whites, or mixing cookie dough.

On the other hand, the KitchenAid 4360369 is designed with a powerful 400-watt motor, providing extra strength for heavier mixtures. This model comes with a bowl-lift design, facilitating easy access to the mixing bowl and making it ideal for large batches. The sturdy construction of the 4360369 enhances stability during operation, allowing users to mix without the worry of the machine moving around the countertop.

Both models are equipped with the iconic planetary mixing action, which ensures that all ingredients are mixed thoroughly. The mixing attachment rotates in one direction while the bowl spins in the opposite direction, covering every corner of the bowl and ensuring consistent blending. Additionally, these mixers come with a variety of included attachments, such as the flat beater, dough hook, and wire whip, enabling users to tackle an array of culinary tasks.

The design aesthetics of both models also warrant mention. With a classic yet modern look, they feature a sturdy stainless-steel bowl that is both durable and easy to clean. Available in a variety of colors, these mixers not only perform exceptionally but also enhance the décor of any kitchen.

Overall, the KitchenAid 4329223 and 4360369 represent the best of technology, design, and functionality, catering to the needs of anyone looking to elevate their culinary skills. With their reliable performance and versatile features, these mixers make cooking and baking an enjoyable and efficient experience.
Top Page Image Contents