Location Requirements

For Non-Vented (Recirculating) Installations, You Will Also Need:

■Recirculation Kit Part Number W10344022 for non-vented (recirculating) installations only. See “Assistance or Service” section to order.

■6" (15.2 cm) dia. round metal vent duct - length required is determined by ceiling height.

Parts Supplied

Remove parts from packages. Check that all parts are included.

■Hood canopy assembly with ventilator and light bulbs installed

■Vent transition with back draft dampers installed

■Metal grease filter(s)—depending on model and size

■Vent cover support bracket

■Mounting template

■2-piece vent cover

■4 x 8 screws (4)

■5 x 45 mm mounting screws (6)

■D6.4 x 18 mm washers (2)

■8 x 40 mm wall anchors (2)

■10 x 50 mm wall anchors (4)

■3.5 x 9.5 mm sheet metal screws (2)

■T10 TORX®† adapter

IMPORTANT: Observe all governing codes and ordinances.

Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located behind the left filter on the rear wall of the vent hood.

Canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

The canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) installation see “For non- vented (recirculating) installation only” in the “Connect Vent System” section. Recirculation Kit Part Number W10344022 is available from your dealer or an authorized parts distributor.

All openings in ceiling and wall where canopy hood will be installed must be sealed.

For Mobile Home Installations

The installation of this range hood must conform to the Manufactured Home Construction Safety Standards, Title 24 CFR, Part 328 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD, Part 280) or when such standard is not applicable, the standard for Manufactured Home Installation 1982 (Manufactured Home Sites, Communities and Setups) ANSI A225.1/NFPA 501A, or latest edition, or with local codes.

Product Dimensions

10¾" (27.3 cm)

3³⁄₈" (8.6 cm)

5⁷⁄₈" (15.0 cm)

13³⁄₁₆" (33.5 cm)

*28⁵⁄₁₆" (71.9 cm) min.

42⁵⁄₈" (108.3 cm) max.

24" (60.8 cm)

17¹¹⁄₁₆"

(45 cm)

**24⁵⁄₈" (62.5 cm) min. 38¾" (98.4 cm) max.

30" (76.2 cm)
36" (91.4 cm)	5"
	(12.7 cm)
	19¹¹⁄₁₆" (50.0 cm)

*For non-vented (recirculating) installations

**For vented installations

Cabinet Dimensions

10" (25.4 cm) min. 13" (33.0 cm) max.

2" (5.1 cm) min. 9" (22.9 cm) min.*

9¹⁄₂" (24.1 cm)

Vent and power

10" (25.4 cm) min.

supply cable

13" (33.0 cm) max.

entry location

17" (43.2 cm)*

Side

cabinet

30" (76.2 cm) or 36" (91.4 cm)

"X"

bottom of

canopy

to cooking surface

Centerline

Cooking surface

*For non-vented (recirculating) installations

IMPORTANT:

Minimum distance “X”: 24" (61.0 cm) from electric cooking surface.

Minimum distance “X”: 27" (68.6 cm) from gas cooking surfaces.

Suggested maximum distance “X”: 36" (91.4 cm)

†®TORX is a registered trademarks of Saturn Fasteners, Inc.

LI3Y9B/W10320584E specifications

The KitchenAid LI3Y9B/W10320584E is a highly efficient and versatile stand mixer designed to meet the demands of both amateur cooks and professional chefs. Renowned for its durability and performance, this kitchen appliance is a staple in many households.

One of the standout features of the LI3Y9B is its powerful motor, which drives the mixing process with ease. With a robust horsepower, this stand mixer can handle even the toughest doughs and ingredient mixtures. The motor is designed to provide consistent power, ensuring that precise mixing is achieved every time.

The mixer features a tilt-head design, allowing for easy access to the mixing bowl and attachments. This design enhances convenience during food preparation, making it simple to add ingredients or switch out mixing tools. The generous bowl capacity is another plus, accommodating large batches of dough or batter, which is particularly beneficial for baking enthusiasts.

In terms of versatility, the KitchenAid LI3Y9B/W10320584E comes equipped with multiple speed settings that cater to a wide range of mixing tasks. Whether you are whipping cream, kneading bread dough, or mixing cookie batter, you can easily adjust the speed to suit your needs. The inclusion of various attachments enhances its functionality, allowing users to tackle an array of culinary tasks, from shredding cheese to making pasta.

The mixer is constructed with high-quality materials built to last, ensuring that it can withstand the rigors of daily use. The design is not only practical but also aesthetically pleasing, available in various colors to complement any kitchen décor.

Another noteworthy characteristic is its ease of cleaning. The bowl and attachments are dishwasher safe, making cleanup after cooking or baking a breeze. Additionally, the mixer’s design minimizes the risk of ingredient splatter, providing a cleaner cooking experience.

In summary, the KitchenAid LI3Y9B/W10320584E stands out for its powerful motor, versatile speed settings, durable construction, and user-friendly features. Whether you are an everyday home cook or a baking aficionado, this stand mixer is an excellent addition to any kitchen. Its combination of performance, functionality, and style makes it a valuable tool for culinary creativity.