2.Install grease filters using two hands by first pulling and turning the knob to the left so that the locking lever does not protrude from the filter.
3.Insert the opposite end of the filter into the retaining channel.
4.Insert knob end and turn knob to the right to lock the filter into place.
A 
BC
RANGE HOOD USE
Operation
The hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.
Hood control panel
The hood controls are located on the
A. Locking lever slot
B. Retaining channel
C.Knob
5.Repeat for remaining filters.
6.Reconnect power.
Check Operation
blower indicator
light 1
2
Operating the light
3 L
1.Check operation of the range hood by turning the power on.
blower indicator
light 1
2
3 L
2.Push the
3.Push the
NOTE: This button must be pushed in for the blower to operate at any speed. The blower indicator light will light up to indicate blower is on and the blower will operate at low speed.
4.Push button “2” to operate the blower at medium speed.
5.Push button “3” to operate blower at high speed.
6.Push button “1” to turn blower off.
1.Push the
2.Push in again to turn lights off.
Operating the blower
1.Push the
NOTE: This button must be pushed in for the blower to operate at any speed. The blower indicator light will light up to indicate blower is on and the blower will operate at low speed.
2.Push button “2” to operate the blower at medium speed.
3.Push button “3” to operate blower at high speed.
4.Push button “1” to turn blower off.
11