Electrical Requirements

Calculating Vent System Length

To calculate the length of the system you need, add the equivalent feet (meters) for each vent piece used in the system.

Maximum equivalent vent length is 35 feet (10.7 meters).

Vent piece

6" (15.2 cm) round

45° elbow

2.5 feet

(0.8 m)

90° elbow

5.0 feet

(1.5 m)

90° elbow

wall cap

6 ft. (1.8 m)

Example vent

system

1 — 90° elbow

5 ft.

(1.5 m)

ft.

(0.6 m)

8 ft. (2.4 m) straight

8 ft.

(2.4 m)

1 — wall cap

0 ft.

(0 m)

system length

13 ft.

(3.9 m)

NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that gently reduce performance.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

IMPORTANT: The hood must be electrically grounded in accordance with local codes and ordinances, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, latest edition, or Canadian Electrical Code, CSA C22.1.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park, Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, Ohio 44131-5575

■A 120-volt, 60-Hz, AC-only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this hood be provided.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure range hood is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

■The range hood must be connected with copper wire only.

■The range hood should be connected directly to the fused disconnect (or circuit breaker) box through flexible armored or nonmetallic sheathed copper cable.

■A UL- or CSA-listed strain relief must be provided at each end of the power supply cable. Wire sizes (copper wire only) and connections must conform with the rating of the appliance as specified on the model/serial rating plate.

■Wire sizes must conform to the requirements of the National Electrical Code, ANSI/NFPA 70, latest edition, or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. 0-M91, latest edition, and all local codes and ordinances.

9763382 specifications

The KitchenAid 9763382 is a highly versatile accessory designed primarily for those who seek to enhance their culinary experiences in the kitchen. Known for its robust construction and user-friendly design, this attachment expands the functionality of various KitchenAid stand mixers, allowing home chefs to explore a range of culinary possibilities.

One of the standout features of the 9763382 is its ability to create fresh pasta at home. The attachment includes adjustable thickness settings, enabling users to customize pasta sheets according to their desired thickness, whether it's for lasagna, fettuccine, or ravioli. This level of control enhances the cooking experience, giving users the opportunity to craft pasta that suits their taste perfectly.

In addition to pasta-making capabilities, the KitchenAid 9763382 is built from high-quality materials that ensure durability and long-lasting performance. The stainless steel construction is not only aesthetically pleasing but also resistant to rust and corrosion, making it easy to clean and maintain. Users can expect a product that withstands frequent use without compromising on quality.

Another key characteristic of the KitchenAid 9763382 is its compatibility with a range of KitchenAid mixer models, making it a versatile addition to existing kitchen equipment. Its easy attachment to the stand mixer simplifies the process of creating homemade dough and pasta, removing the need for additional appliances and saving valuable counter space.

The design of the KitchenAid 9763382 also prioritizes ease of use. Clear instructions guide users through the pasta-making process, making it accessible even for those who may be new to the art of pasta preparation. The attachment's straightforward assembly means that it can be set up and taken down with minimal effort, making the experience enjoyable rather than cumbersome.

In terms of technology, the 9763382 leverages KitchenAid's innovative engineering, ensuring a seamless integration with the stand mixer’s motor for efficient operation. The powerful performance reduces the time spent on food preparation, enabling users to focus on creativity in the kitchen.

Overall, the KitchenAid 9763382 is an essential tool for those passionate about cooking. With its combination of versatility, ease of use, and durable design, it transforms the way users approach pasta making and dough mixing, allowing them to bring authentic Italian cuisine into their homes with ease.