Venting Requirements, Installation Clearances

Installation Clearances

36" (91.4 cm)

typical

countertop

height

see NOTE

Cold weather installations

An additional backdraft damper should be installed to minimize backward cold air flow and a nonmetallic thermal break to minimize conduction of outside temperatures as part of the vent system. The damper should be on the cold air side of the thermal break.

The break should be as close as possible to where the vent system enters the heated portion of the house.

Make-up air

Local building codes may require the use of make-up air systems when using ventilation systems greater than specified CFM of air movement. The specified CFM varies from locale to locale.

Consult your HVAC professional for specific requirements in your area.

Venting Methods

This hood is factory set for venting through the roof or wall.

A 6" (15.2 cm) round vent system is needed for installation (not included). The hood exhaust opening is 6" (15.2 cm) round.

NOTE: Flexible vent is not recommended. Flexible vent creates back pressure and air turbulence that greatly reduces performance.

Vent system can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.

A 6" (15.2 cm) round vent system length should not exceed 35 feet (10.7 m).

NOTE: The hood chimneys are adjustable and designed to meet varying ceiling or soffit heights depending on the distance “X” between the bottom of the hood and the cooking surface. For higher ceilings, a 40" (101.6 cm) Chimney Extension Kit No. 4396913 (Stainless Steel) or Kit No. 4396914 (Meteorite) is available. See your dealer. The chimney extension replaces the upper chimney shipped with the hood.

IMPORTANT:

Minimum distance “X”: 24" (61.0 cm)

Suggested maximum distance “X”: 30" (76.2 cm)

For vented installations, the chimneys can be adjusted for ceilings between 7' 7¹⁄₈" (2.31 m) and 9' 1³⁄₄" (2.79 m).

For recirculating installations, the chimney can be adjusted for ceilings between 8' 3³⁄₈" (2.52 m) and 9' 5¹⁄₄" (2.88 m).

Venting Requirements

■Vent system must terminate to the outside, except for the recirculating installation.

■Do not terminate the vent system in an attic or other enclosed area.

■Do not use 4" (10.2 cm) laundry-type wall caps.

■Use 6" (15.2 cm) metal vent only. Rigid metal vent is recommended. Do not use plastic or metal foil vent.

For the most efficient and quiet operation:

■Use a straight run or as few elbows as possible.

■Use no more than three 90° elbows.

■Make sure there is a minimum of 24" (61 cm) of straight vent between the elbows if more than one elbow is used.

■Do not install two elbows together.

■Use duct tape to seal all joints in the vent system.

■Use caulking to seal exterior wall or roof opening around the cap.

For recirculating installations see “Recirculating Installations” in “Install Chimney Covers” section.

roof cap
6"	6"	wall
(15.2 cm)	6"	cap
(15.2 cm)	(15.2 cm)	cap
round vent	(15.2 cm)
round vent	round vent
	round vent
Roof venting	Wall venting

9763382 specifications

The KitchenAid 9763382 is a highly versatile accessory designed primarily for those who seek to enhance their culinary experiences in the kitchen. Known for its robust construction and user-friendly design, this attachment expands the functionality of various KitchenAid stand mixers, allowing home chefs to explore a range of culinary possibilities.

One of the standout features of the 9763382 is its ability to create fresh pasta at home. The attachment includes adjustable thickness settings, enabling users to customize pasta sheets according to their desired thickness, whether it's for lasagna, fettuccine, or ravioli. This level of control enhances the cooking experience, giving users the opportunity to craft pasta that suits their taste perfectly.

In addition to pasta-making capabilities, the KitchenAid 9763382 is built from high-quality materials that ensure durability and long-lasting performance. The stainless steel construction is not only aesthetically pleasing but also resistant to rust and corrosion, making it easy to clean and maintain. Users can expect a product that withstands frequent use without compromising on quality.

Another key characteristic of the KitchenAid 9763382 is its compatibility with a range of KitchenAid mixer models, making it a versatile addition to existing kitchen equipment. Its easy attachment to the stand mixer simplifies the process of creating homemade dough and pasta, removing the need for additional appliances and saving valuable counter space.

The design of the KitchenAid 9763382 also prioritizes ease of use. Clear instructions guide users through the pasta-making process, making it accessible even for those who may be new to the art of pasta preparation. The attachment's straightforward assembly means that it can be set up and taken down with minimal effort, making the experience enjoyable rather than cumbersome.

In terms of technology, the 9763382 leverages KitchenAid's innovative engineering, ensuring a seamless integration with the stand mixer’s motor for efficient operation. The powerful performance reduces the time spent on food preparation, enabling users to focus on creativity in the kitchen.

Overall, the KitchenAid 9763382 is an essential tool for those passionate about cooking. With its combination of versatility, ease of use, and durable design, it transforms the way users approach pasta making and dough mixing, allowing them to bring authentic Italian cuisine into their homes with ease.