KitchenAid 9763382 Installation Requirements, Tools and Parts, Location Requirements

Page 4

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the safety instructions provided with any tools listed here.

Tools needed:

level

drill with 1¹⁄₄" (3.0 cm) drill bit

pilot hole drill bit (determined by chimney support attachment method)

pencil

wire stripper or utility knife

measuring tape or ruler

pliers

caulking gun and weatherproof caulking compound

duct tape

jig saw or keyhole saw

flat blade screwdriver

metal snips

Phillips screwdriver

Parts needed:

2 UL- or CSA- listed, ¹⁄₂" (12.5 mm) strain reliefs

power supply cable

1 wall or roof cap

metal vent system

4, concrete anchors for ¹⁄₄" x 4" hex head lag bolts if installing into concrete

Parts supplied:

Remove parts from packages. Check that all parts were included.

hood canopy assembly with ventilator and light bulbs installed

chimney assembly

ceiling template

Installation Instructions and Use & Care Guide

3 filters

hardware package (4 wood shelf bolts, 4 wood shelf bolt washers, 4 wood shelf nuts, 4 concrete plugs, 1 mounting template, 1 damper)

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

Island hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance.

Grounded electrical outlet is required. See “Electrical Requirements” section.

It is recommended that the hood be fastened into solid wood.

The island hood is factory set for venting through the roof or wall. For recirculating installations see “Recirculating Installations” in “Install Chimney Covers” section.

All openings in ceiling and where island hood will be installed must be sealed.

Product Dimensions

13³⁄₄"

 

 

12¹⁄₁₆"

(34.9 cm)

 

 

(30.6 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

26³⁄₈" (65.1 cm)

min.

39" (99.1cm)

max.

23⁵⁄₈"

(60.0 cm)

 

 

 

 

 

 

 

27¹⁄₂"

 

 

 

4³⁄₄"

(69.9 cm)

 

 

 

 

35

³⁄₈" (89.9 cm)

 

 

 

 

 

 

(12.1 cm)

 

 

 

 

 

 

 

 

 

 

 

Recirculating chimney kit dimensions

For recirculating installations, optional Recirculating Chimney Kit No. 4396911 (Stainless Steel) or Kit No. 4396912 (Meteorite) must be used. These kits include a new lower chimney cover (that replaces the lower chimney cover shipped with the island hood), a charcoal filter and a diverter.

 

 

 

12¹⁄₁₆"

13³⁄₄"

 

 

(34.9 cm)

 

 

 

(30.6 cm)

 

 

 

 

 

 

 

 

 

 

 

3¹⁄₂"

 

 

 

 

 

 

 

(8.9 cm)

 

 

 

 

 

 

32" (81.3 cm)

 

 

 

 

 

 

 

min.

 

 

 

 

 

 

 

 

 

 

 

 

 

39" (99.1 cm)

 

 

 

 

 

 

 

max.

 

 

 

 

 

23⁵⁄₈"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(60.0 cm)

 

 

 

 

 

 

 

 

 

 

12¹⁄₂"

 

 

 

 

 

 

 

(31.8 cm)

 

 

 

 

 

 

 

 

 

 

5"

 

 

 

 

 

 

 

 

 

 

 

 

(12.7 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Image 4
Contents Pour Cuisine Configurée EN Îlot Range Hood Safety Table of ContentsTable DES Matières Important Safety Instructions Installation Requirements Product DimensionsRecirculating chimney kit dimensions Tools and PartsVenting Requirements Installation ClearancesVenting Methods Electrical Requirements Calculating Vent System LengthInstall Chimney Support Installation InstructionsInstalling Chimney Extension Kit Optional Complete Chimney Support Installation Make Electrical ConnectionInstall Chimney Covers Vented Installation OptionRecirculating Installation Option, Kit Required Chimney Extension Kit Installation OptionalInstall Range Hood Complete InstallationOperation Range Hood USECheck Operation Accessories Cleaning and MaintenanceRange Hood Care Requesting Assistance or Service If you need replacement partsFor parts, accessories and service in Canada For further assistanceKitchenaid Ventilation Warranty CallWiring Diagram Sécurité DE LA Hotte DE Cuisinière Votre sécurité et celle des autres est très importanteConservez CES Instructions Exigences Dinstallation Exigences demplacementDimensions du produit Outillage et piècesDégagements de séparation à respecter Exigences concernant lévacuationMéthodes dévacuation Spécifications électriques Calcul de la longueur effective du circuit dévacuationInstallation du support de cheminée Instructions DinstallationInstallation de lextension de cheminée option Achever linstallation du support de cheminée Raccordement électriqueInstallation avec décharge à lextérieur Option de linstallation du cache-cheminéeOption de linstallation avec recyclage, kit nécessaire Installation de la hotte de cuisinière Installation du kit dextension de cheminée optionAchever linstallation Contrôle du fonctionnementFonctionnement CuisinièreNettoyage et entretien Accessoires Remplacement dune lampe à halogèneDemande Dassistance OU DE Service Pour pièces, accessoires et service au CanadaSi vous avez besoin de pièces de rechange Pour plus dassistanceGarantiedusystèmedeventilationkitchenaid Garantie Limitée DE UN ANSchéma DE Câblage Page 9763382

9763382 specifications

The KitchenAid 9763382 is a highly versatile accessory designed primarily for those who seek to enhance their culinary experiences in the kitchen. Known for its robust construction and user-friendly design, this attachment expands the functionality of various KitchenAid stand mixers, allowing home chefs to explore a range of culinary possibilities.

One of the standout features of the 9763382 is its ability to create fresh pasta at home. The attachment includes adjustable thickness settings, enabling users to customize pasta sheets according to their desired thickness, whether it's for lasagna, fettuccine, or ravioli. This level of control enhances the cooking experience, giving users the opportunity to craft pasta that suits their taste perfectly.

In addition to pasta-making capabilities, the KitchenAid 9763382 is built from high-quality materials that ensure durability and long-lasting performance. The stainless steel construction is not only aesthetically pleasing but also resistant to rust and corrosion, making it easy to clean and maintain. Users can expect a product that withstands frequent use without compromising on quality.

Another key characteristic of the KitchenAid 9763382 is its compatibility with a range of KitchenAid mixer models, making it a versatile addition to existing kitchen equipment. Its easy attachment to the stand mixer simplifies the process of creating homemade dough and pasta, removing the need for additional appliances and saving valuable counter space.

The design of the KitchenAid 9763382 also prioritizes ease of use. Clear instructions guide users through the pasta-making process, making it accessible even for those who may be new to the art of pasta preparation. The attachment's straightforward assembly means that it can be set up and taken down with minimal effort, making the experience enjoyable rather than cumbersome.

In terms of technology, the 9763382 leverages KitchenAid's innovative engineering, ensuring a seamless integration with the stand mixer’s motor for efficient operation. The powerful performance reduces the time spent on food preparation, enabling users to focus on creativity in the kitchen.

Overall, the KitchenAid 9763382 is an essential tool for those passionate about cooking. With its combination of versatility, ease of use, and durable design, it transforms the way users approach pasta making and dough mixing, allowing them to bring authentic Italian cuisine into their homes with ease.