KitchenAid 36" (91.4 cm) 48" (121.9 cm) Island Canopy Range Hood Parts needed, Parts supplied

Page 2

Before you start...

Your safety and the safety of

others is very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill

or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING”. These words mean:

DANGER

You can be killed or seriously injured if you don’t immediately follow instructions.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

Important: Observe all governing codes and ordinances.

Proper installation is your responsibility:

WARNING — TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable Codes and Standards, including Fire Rated Construction. The combustion airflow needed for safe operation of fuel-burning equipment may be affected by this unit’s operation. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

WARNING — To reduce the risk of fire, use only metal ductwork.

This unit must be grounded.

Parts needed:

2 U.L.- or C.S.A.- listed, 1/2" (12.5 mm) conduit connectors

power supply cable 1 wall or roof cap metal vent system

Parts supplied:

 

 

8 trim

support

 

clips

6 screws mounting

support

bracket

system

 

upper

 

 

chimney

 

 

trim

 

mounting

 

 

 

 

template

upper

 

upper

 

chimney

chimney

trim

lower

 

 

chimney

 

lower

 

lower

chimney

 

 

chimney

trim

 

 

trim

 

 

damper

canopy

•Have a qualified technician install this range hood.

•Comply with installation clearances specified on the model/serial rating plate.

Model/serial rating plate is located inside the range hood on the rear wall.

Island canopy hood location should be away from strong draft areas, such as windows, doors and strong heating vents.

Grounded electrical outlet is required.

See “Electrical requirements.”

Note: The island canopy hood is factory set for venting through the roof or wall. For non-vented (recirculating) installations see “Non- Vented (Recirculating) Kits” on the back page.

All openings in ceiling and wall where range hood will be installed must be sealed.

Tools needed:

level

drill

caulking gun and weatherproof caulking compound

1-1/4" drill bit

pencil

pliers

duct tape

measuring

tape or rulermetal snips

wire stripper or utility knife

allen wrench set

saber or keyhole saw

flat-blade screwdriver

Phillips screwdriver

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation Instructions Use and Care Guide Parts supplied Your safety and the safety Others is very importantParts needed Tools neededFor the most efficient and quiet operation Product dimensionsVenting requirements Venting methods Calculating the vent system lengthElectrical requirements Installation stepsInstallation PreparationConcrete ceiling use inserts and screws provided Excessive Weight Hazard Disconnect power supply Failure to do so can result in back or other injuryInstall chimney sections Check operationOperation CleaningUse and Care Information Utensil Bar Wiring diagram AccessoriesMaintenance Charcoal FiltersWarranty Kitchenaid Ventilation WarrantyRequesting Assistance or Service Our consultants provide assistance with807 area code in Ontario Direct service branchesExcept 807 area code 4329223/9763387 Référence rapidePages Outillage nécessaire Pièces nécessairesPièces fournies Votre sécurité et celle des autres Est très importanteDimensions du produit Dimensions des placards Circuit de décharge de l’airCalcul de la longueur effective du système de décharge Décharge horizontale à travers le murAlimentation électrique Les étapes de l’installationInstallation Préparation Interrompre l’alimentation électrique Plafond de bois utiliser des vis à bois de 10,2 cm 4 po12. Exécution des raccordements électriques Vis Mm 1/4 poHotte Mettre le système sous tensionContrôler le fonctionnement de la Utilisation de la hotte Fermeture du logement des organes de commandeRenseignements d’utilisation et entretien NettoyageSchéma de câblage AccessoiresEntretien Filtres au charbonGarantie GarantiedusystèmedeventilationkitchenaidSi vous avez besoin de pièces de rechange Demande dassistance ou de serviceSi vous avez besoin dassistance ou de service aux É.-U Pour plus dassistancePour plus d’assistance Demande d’assistance ou de serviceSi vous avez besoin dassistance ou de service au Canada 30 et 18 h 00 HNE, en composant

36" (91.4 cm) 48" (121.9 cm) Island Canopy Range Hood specifications

The KitchenAid 36" (91.4 cm) and 48" (121.9 cm) Island Canopy Range Hoods are designed to enhance both the functionality and aesthetic appeal of your kitchen. These powerful ventilation systems are perfect for chefs who demand excellence in their cooking environment, merging innovative technology with a sleek, modern look.

One of the key features of these range hoods is their high-performance ventilation capabilities. With multiple fan speeds, the Island Canopy Range Hoods can effectively remove smoke, steam, and cooking odors. The powerful motors ensure that your kitchen remains a pleasant and inviting space, regardless of the intensity of your cooking.

The hoods are equipped with high-quality stainless steel construction, providing durability and a contemporary aesthetic that complements various kitchen designs. The smooth surface is easy to clean and resists fingerprints and smudges, making maintenance a breeze.

The baffle filters are another notable characteristic of these hoods. Designed to effectively capture grease and other particles, these filters are not only efficient but are also dishwasher-safe, simplifying clean-up processes. Additionally, the range hoods feature a convenient filter reminder to alert you when it's time for cleaning or replacement.

In terms of lighting, the KitchenAid Island Canopy Range Hoods incorporate integrated LED task lighting. This feature illuminates your cooking surface, enhancing visibility while adding a stylish glow to your kitchen. The lights can be adjusted to accommodate different cooking tasks, ensuring you have the right amount of illumination at all times.

Another significant aspect is the quiet operation of these hoods. With sound-dampening technology, they provide powerful ventilation while minimizing noise, allowing for a more enjoyable kitchen experience. This is particularly beneficial when entertaining guests or during family gatherings when conversation is key.

The installation options for the KitchenAid Island Canopy Range Hoods are flexible, making them suitable for various kitchen layouts. They can be easily mounted above an island cooktop, providing both functionality and a striking focal point in your kitchen.

In summary, the KitchenAid 36" and 48" Island Canopy Range Hoods offer a combination of powerful performance, modern design, and user-friendly features. With their advanced technologies and thoughtful construction, they are an excellent addition to any culinary space, helping to create an optimal cooking environment while enhancing the overall kitchen experience.
Top Page Image Contents