KitchenAid 36" (91.4 cm) 48" (121.9 cm) Island Canopy Range Hood Excessive Weight Hazard

Page 6

7. Align support mounting bracket with holes in ceiling. Attach support system frame to ceiling using anchors recommended for your type of ceiling:

•Concrete ceiling — use inserts and screws provided.

•Wood ceiling — use 4" (10.2 cm) long wood screws.

•Plaster or sheet rock ceiling — attach support mounting bracket to ceiling joists if possible. If ceiling joists are not available, you must build a supporting structure behind the plaster or sheet rock.

Make sure the support is connected firmly to ceiling.

.

10. Remove the terminal box cover from the range hood. Remove the power supply cable knockout using a flat-blade screwdriver. Do not remove optional remote blower knockout. Attach conduit connector into power supply cable opening so that conduit connector clamping screws are inside the terminal box.

WARNING

Excessive Weight Hazard

Use two or more people to move and install island canopy hood.

Failure to do so can result in back or other injury.

Electrical connection

WARNING

Electrical Shock Hazard

Disconnect power before making electrical connections.

Connect ground wire to green ground screw in terminal box.

Failure to do so can result in death or electrical shock.

12. Make electrical connection:

four set

 

screws

slot

 

 Disconnect power supply.

 Feed enough power supply cable

through conduit connector to

make electrical connections.

 Connect the power supply cable to

hood terminal box through the

U.L.- or C.S.A.-listed conduit

8. Determine the height of the canopy. The range hood requires at least 24" (61 cm) of clearance between bottom of range hood canopy and cooking surface.

The bottom of the canopy will be approximately 9" (22.9 cm) below the bottom of the support system. To change the canopy height, loosen the four set screws on the support frame. Adjust support frame to the desired length and tighten all four set screws firmly in place before attaching canopy.

If used, attach the vent damper to the inside bottom of the chimney support frame. Make sure damper opens to outside.

9. Press on handle in front of filters to release filters from range hood canopy. Remove filters and set aside.

6

bolt

1/4" (6.4 mm)

11. Loosen four bolts located next to exhaust opening so that there is approximately 1/4" (6.4 mm) space between bolt head and canopy. Lift canopy and insert bolts into slots in support system frame. Tighten bolts to support system frame and canopy.

connector.

 Connect the white wire of the

power supply cable with the white

lead in the hood using a twist-on

connector; connect the black wire

of the power supply cable with the

black lead in the hood using a

twist-on connector.

 Connect the power supply green

(green and yellow) ground wire

under the green, ground screw.

 Tighten conduit connector screws.

 Replace the terminal box cover.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions Use and Care Guide Parts supplied Your safety and the safety Others is very importantParts needed Tools neededProduct dimensions Venting requirementsFor the most efficient and quiet operation Venting methods Calculating the vent system lengthElectrical requirements Installation stepsInstallation PreparationConcrete ceiling use inserts and screws provided Excessive Weight Hazard Disconnect power supply Failure to do so can result in back or other injuryInstall chimney sections Check operationCleaning Use and Care InformationOperation Utensil Bar Wiring diagram AccessoriesMaintenance Charcoal FiltersWarranty Kitchenaid Ventilation WarrantyRequesting Assistance or Service Our consultants provide assistance withDirect service branches Except 807 area code807 area code in Ontario Référence rapide Pages4329223/9763387 Outillage nécessaire Pièces nécessairesPièces fournies Votre sécurité et celle des autres Est très importanteDimensions du produit Dimensions des placards Circuit de décharge de l’airCalcul de la longueur effective du système de décharge Décharge horizontale à travers le murAlimentation électrique Les étapes de l’installationInstallation Préparation Interrompre l’alimentation électrique Plafond de bois utiliser des vis à bois de 10,2 cm 4 po12. Exécution des raccordements électriques Vis Mm 1/4 poMettre le système sous tension Contrôler le fonctionnement de laHotte Utilisation de la hotte Fermeture du logement des organes de commandeRenseignements d’utilisation et entretien NettoyageSchéma de câblage AccessoiresEntretien Filtres au charbonGarantie GarantiedusystèmedeventilationkitchenaidSi vous avez besoin de pièces de rechange Demande dassistance ou de serviceSi vous avez besoin dassistance ou de service aux É.-U Pour plus dassistancePour plus d’assistance Demande d’assistance ou de serviceSi vous avez besoin dassistance ou de service au Canada 30 et 18 h 00 HNE, en composant

36" (91.4 cm) 48" (121.9 cm) Island Canopy Range Hood specifications

The KitchenAid 36" (91.4 cm) and 48" (121.9 cm) Island Canopy Range Hoods are designed to enhance both the functionality and aesthetic appeal of your kitchen. These powerful ventilation systems are perfect for chefs who demand excellence in their cooking environment, merging innovative technology with a sleek, modern look.

One of the key features of these range hoods is their high-performance ventilation capabilities. With multiple fan speeds, the Island Canopy Range Hoods can effectively remove smoke, steam, and cooking odors. The powerful motors ensure that your kitchen remains a pleasant and inviting space, regardless of the intensity of your cooking.

The hoods are equipped with high-quality stainless steel construction, providing durability and a contemporary aesthetic that complements various kitchen designs. The smooth surface is easy to clean and resists fingerprints and smudges, making maintenance a breeze.

The baffle filters are another notable characteristic of these hoods. Designed to effectively capture grease and other particles, these filters are not only efficient but are also dishwasher-safe, simplifying clean-up processes. Additionally, the range hoods feature a convenient filter reminder to alert you when it's time for cleaning or replacement.

In terms of lighting, the KitchenAid Island Canopy Range Hoods incorporate integrated LED task lighting. This feature illuminates your cooking surface, enhancing visibility while adding a stylish glow to your kitchen. The lights can be adjusted to accommodate different cooking tasks, ensuring you have the right amount of illumination at all times.

Another significant aspect is the quiet operation of these hoods. With sound-dampening technology, they provide powerful ventilation while minimizing noise, allowing for a more enjoyable kitchen experience. This is particularly beneficial when entertaining guests or during family gatherings when conversation is key.

The installation options for the KitchenAid Island Canopy Range Hoods are flexible, making them suitable for various kitchen layouts. They can be easily mounted above an island cooktop, providing both functionality and a striking focal point in your kitchen.

In summary, the KitchenAid 36" and 48" Island Canopy Range Hoods offer a combination of powerful performance, modern design, and user-friendly features. With their advanced technologies and thoughtful construction, they are an excellent addition to any culinary space, helping to create an optimal cooking environment while enhancing the overall kitchen experience.
Top Page Image Contents