KitchenAid W10154991A Mobile Home Additional Installation Requirements, Slide-in Range

Page 5

■The floor anti-tip bracket must be installed. To install the anti- tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

■Grounded electrical supply is required. See “Electrical Requirements” section.

■Proper gas supply connection must be available. See “Gas Supply Requirements” section.

■Contact a qualified floor covering installer to check that the floor covering can withstand at least 200°F (93°C).

■Use an insulated pad or ¼" (0.64 cm) plywood under range if installing range over carpeting.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, use the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the current standards CAN/CSA-A240-latest edition, or with local codes.

Mobile home installations require:

■When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

■Four-wire power supply cord or cable must be used in a mobile home installation. The appliance wiring will need to be revised. See “Electrical Connection” section.

Product Dimensions

Freestanding Range

Slide-in Range

B

A

C

D*

E

F**

A. 5³⁄₄" (14.6 cm)

E. Model/serial number plate

B. 30" (76.2 cm)

(located on the right-hand

C. 41³⁄₄" (106 cm) overall height

side oven door trim)

F. 27¹⁄₄" (69.2 cm) max. from

with leveling legs screwed all

the way in.

handle to standoff at back

D. 36" (91.4 cm) cooktop trim

of range**

 

height with leveling legs

 

screwed all the way in*

 

A

F

B*

C

D

E**

A. 30⁹⁄₁₆" (77.6 cm)

D 30" (76.2 cm)

B. 35⁵⁄₈" (90.5 cm) height to

E. 27¼" (69.2 cm) from

underside of cooktop edge

handle to standoff at

with leveling legs screwed

back of range**

all the way in*

F. 23" (58.4 cm) countertop

C. Model/serial number plate

notch to rear of cooktop

(located on the right-hand

 

side oven door trim)

 

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1" (2.5 cm) beyond 24" (61 cm) base cabinet.

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**When installed in a 24" (61 cm) base cabinet with 25" (63.5 cm) countertop; front of oven door protrudes 1³⁄₄" (4.4 cm) beyond 24" (61 cm) base cabinet.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents W10154991A DE 30 76,2 CMTable DES Matières Range SafetyWhat to do if YOU Smell GAS Location Requirements Installation RequirementsToolsandParts Product Dimensions Freestanding Range Mobile Home Additional Installation RequirementsMobile home installations require Slide-in RangeSlide-In Ranges Installation ClearancesFreestanding Ranges If connecting to a 3-wire system If connecting to a 4-wire systemLocal codes may permit the use of a UL listed, 3-wire Electrical Requirements U.S.A.OnlyGas Supply Requirements Electrical Requirements -Canada OnlyType of Gas Gas Supply LineCountertopPreparation Gas Supply Pressure TestingBurner Input Requirements Gas Pressure RegulatorUnpack Range Installation InstructionsMeasureforProperHeight Slide-In RangesInstallAnti-TipBracket Adjust LevelingLegsVerifyAnti-Tip Bracket Location RemoveWarming DrawerLevel Range To Remove Warming DrawerDirect Wire Power Supply CordStyle 1 Power supply cord strain relief Electrical Connection -U.S.A.OnlyStyle 2 Direct wire strain relief Wire connection Power Supply CordWire Connection Direct Wire Direct Wire Installation Copper or Aluminum WireTypical rigid pipe connection Make Gas ConnectionElectronicIgnitionSystem Initial lighting and gas flame adjustmentsTypical flexible connection Complete ConnectionReplace Oven RacksandWarmingDrawer Complete InstallationLPGas Conversion GAS ConversionsTo Convert Gas Pressure Regulator If range does not operate, check the followingTo Convert TripleTier Flame Burners on some models Reinstall the cap onto the regulatorTo Convert Standard Surface Burners Gas orifice spuds are stamped with a number, marked withNaturalGas Conversion To Convert TripleTier Flame Burner on some models Votre sécurité et celle des autres est très importante Sécurité DE LA CuisinièreOutillageetpièces Exigences D’INSTALLATIONExigencesd’emplacement Cuisinière encastrée Dimensions du produit Cuisinière autoportanteCuisinières encastrées Dégagements de séparation à respecterCuisinières autoportantes Spécifications del’alimentation engaz Spécifications électriquesType de gaz Gaz naturelCanalisation de gaz PréparationduplandetravailDébit thermique des brûleurs Détendeur de gazDéballagede lacuisinière Instructions DinstallationMesurespourunehauteurappropriée Réglage despieds de nivellementInstallation de la brideantibasculement Retraitdutiroir-réchaud Vérificationdelemplacement de labride AntibasculementRéglage del’aplomb delacuisinière Raccordement à la canalisation degazRaccordement typique par raccord flexible Installée sur le brûleur avant gaucheCuisinière encastrée Compléter le raccordemantAllumage initial et réglages des flammes Système dallumageélectroniqueBrûleur à flamme TripleTier Si le brûleur ne sallume pas correctementAcheverlinstallation Réinstallationdes grillesdufouret Dutiroir-réchaudConversions Pour Changement DE GAZ Conversion pourlalimentationaupropaneDétendeur Conversion des brûleurs standard de la table de cuissonImportant Ne pas enlever le détendeur Enlever la plaque associée au gicleur externe Conversionpourlalimentation augaz naturel Chiffre gravé Holes in bracket Trous dans la bride All rights reserved

W10154991A specifications

The KitchenAid W10154991A is a versatile kitchen appliance designed to simplify meal preparation while enhancing culinary creativity. This food processor is equipped with innovative features and technologies that make it an essential addition to any modern kitchen.

One of the main features of the W10154991A is its powerful motor, which allows for quick and efficient processing of various ingredients. Whether you're chopping vegetables, shredding cheese, or mixing dough, this food processor can handle a wide range of tasks with ease. The motor's robust performance ensures that you can complete your cooking projects in a fraction of the time compared to using manual methods.

Another significant characteristic of the KitchenAid W10154991A is its variety of attachments and blades. The food processor comes equipped with multiple blades for different functions, including slicing, shredding, and chopping. This versatility enables users to achieve the desired texture and consistency for their recipes, all with one appliance. The included attachments are designed for easy installation and removal, making the transition between tasks seamless.

The design of the W10154991A also speaks to its user-friendly nature. It features a large capacity bowl, allowing you to process larger quantities of ingredients at once, which is ideal for meal prepping or when entertaining guests. The bowl is made from durable materials that can withstand the rigors of daily use while remaining easy to clean, as many parts are dishwasher safe.

Safety is a priority in the design of the KitchenAid W10154991A. It includes a safety lock feature that ensures the processor will not operate unless the bowl and lid are correctly secured. This feature gives users peace of mind while using the appliance and helps prevent accidents in the kitchen.

In terms of technology, the KitchenAid W10154991A employs a straightforward control panel that includes several speed settings. This means you can select the perfect speed for the task at hand, whether you need a gentle pulse or a steady chop. The intuitive design of the control panel makes it accessible for cooks of all skill levels.

In conclusion, the KitchenAid W10154991A food processor is an excellent investment for anyone looking to enhance their cooking experience. With its powerful motor, versatile attachments, user-friendly design, and safety features, this appliance stands out in the crowded market of kitchen gadgets. It empowers users to explore their culinary potential while simplifying time-consuming tasks in the kitchen.
Top Page Image Contents