KitchenAid W10154991A Electrical Requirements -Canada Only, Gas Supply Requirements, Type of Gas

Page 8

Electrical Requirements -Canada Only

WARNING

Electrical Shock Hazard

Electrically ground range.

Failure to do so can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path is adequate and wire gauge are in accordance with local codes.

Be sure that the electrical connection and wire size are adequate and in conformance with CSA Standard C22.1, Canadian Electrical Code, Part 1 - latest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

Canadian Standards Association

178 Rexdale Blvd.

Toronto, ON M9W 1R3 CANADA.

■Check with a qualified electrical installer if you are not sure the range is properly grounded.

Range Rating*

 

Specified Rating of

 

 

Power Supply Cord Kit

 

 

and Circuit Protection

 

 

 

120/240 Volts

120/208 Volts

Amps

 

 

 

8.8 - 16.5 KW

7.8 - 12.5 KW

40 or 50**

16.6 - 22.5 KW

12.6 - 18.5 KW

50

 

 

 

*The NEC calculated load is less than the total connected load listed on the model/serial rating plate.

**If connecting to a 50-amp circuit, use a 50-amp rated cord with kit. For 50-amp rated cord kits, use kits that specify use with a nominal 1³⁄₈" (34.93 mm) diameter connection opening.

■A time-delay fuse or circuit breaker is recommended.

■This range is equipped with a CSA International Certified Power Cord intended to be plugged into a standard 14-50R wall receptacle. Be sure the wall receptacle is within reach of range’s final location.

■Do not use an extension cord.

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved gas supply line.

Install a shut-off valve.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 14" (36 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149 - latest edition.

IMPORTANT: Leak testing of the range must be conducted according to the manufacturers instructions.

Type of Gas

Natural gas:

This range is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas.

■This range is factory set for use with Natural gas. See “Gas Conversions” section. The model/serial rating plate located on the right side oven door trim has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier.

LP gas conversion:

Conversion must be done by a qualified service technician.

No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See “Gas Conversions” section.

Gas Supply Line

■Provide a gas supply line of ¾" (1.9 cm) rigid pipe to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size can be ½" (1.3 cm) minimum. Usually, LP gas suppliers determine the size and materials used in the system.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DE 30 76,2 CM W10154991ARange Safety Table DES MatièresWhat to do if YOU Smell GAS Location Requirements Installation RequirementsToolsandParts Mobile Home Additional Installation Requirements Product Dimensions Freestanding RangeMobile home installations require Slide-in RangeSlide-In Ranges Installation ClearancesFreestanding Ranges If connecting to a 4-wire system If connecting to a 3-wire systemLocal codes may permit the use of a UL listed, 3-wire Electrical Requirements U.S.A.OnlyElectrical Requirements -Canada Only Gas Supply RequirementsType of Gas Gas Supply LineGas Supply Pressure Testing CountertopPreparationBurner Input Requirements Gas Pressure RegulatorInstallation Instructions Unpack RangeMeasureforProperHeight Slide-In RangesAdjust LevelingLegs InstallAnti-TipBracketRemoveWarming Drawer VerifyAnti-Tip Bracket LocationLevel Range To Remove Warming DrawerPower Supply Cord Direct WireStyle 1 Power supply cord strain relief Electrical Connection -U.S.A.OnlyWire connection Power Supply Cord Style 2 Direct wire strain reliefDirect Wire Installation Copper or Aluminum Wire Wire Connection Direct WireMake Gas Connection Typical rigid pipe connectionInitial lighting and gas flame adjustments ElectronicIgnitionSystemTypical flexible connection Complete ConnectionComplete Installation Replace Oven RacksandWarmingDrawerGAS Conversions LPGas ConversionTo Convert Gas Pressure Regulator If range does not operate, check the followingReinstall the cap onto the regulator To Convert TripleTier Flame Burners on some modelsTo Convert Standard Surface Burners Gas orifice spuds are stamped with a number, marked withNaturalGas Conversion To Convert TripleTier Flame Burner on some models Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteOutillageetpièces Exigences D’INSTALLATIONExigencesd’emplacement Dimensions du produit Cuisinière autoportante Cuisinière encastréeCuisinières encastrées Dégagements de séparation à respecterCuisinières autoportantes Spécifications électriques Spécifications del’alimentation engazType de gaz Gaz naturelPréparationduplandetravail Canalisation de gazDébit thermique des brûleurs Détendeur de gazInstructions Dinstallation Déballagede lacuisinièreMesurespourunehauteurappropriée Réglage despieds de nivellementInstallation de la brideantibasculement Vérificationdelemplacement de labride Antibasculement Retraitdutiroir-réchaudRéglage del’aplomb delacuisinière Raccordement à la canalisation degazInstallée sur le brûleur avant gauche Raccordement typique par raccord flexibleCuisinière encastrée Compléter le raccordemantSystème dallumageélectronique Allumage initial et réglages des flammesBrûleur à flamme TripleTier Si le brûleur ne sallume pas correctementRéinstallationdes grillesdufouret Dutiroir-réchaud AcheverlinstallationConversions Pour Changement DE GAZ Conversion pourlalimentationaupropaneDétendeur Conversion des brûleurs standard de la table de cuissonImportant Ne pas enlever le détendeur Enlever la plaque associée au gicleur externe Conversionpourlalimentation augaz naturel Chiffre gravé Holes in bracket Trous dans la bride All rights reserved

W10154991A specifications

The KitchenAid W10154991A is a versatile kitchen appliance designed to simplify meal preparation while enhancing culinary creativity. This food processor is equipped with innovative features and technologies that make it an essential addition to any modern kitchen.

One of the main features of the W10154991A is its powerful motor, which allows for quick and efficient processing of various ingredients. Whether you're chopping vegetables, shredding cheese, or mixing dough, this food processor can handle a wide range of tasks with ease. The motor's robust performance ensures that you can complete your cooking projects in a fraction of the time compared to using manual methods.

Another significant characteristic of the KitchenAid W10154991A is its variety of attachments and blades. The food processor comes equipped with multiple blades for different functions, including slicing, shredding, and chopping. This versatility enables users to achieve the desired texture and consistency for their recipes, all with one appliance. The included attachments are designed for easy installation and removal, making the transition between tasks seamless.

The design of the W10154991A also speaks to its user-friendly nature. It features a large capacity bowl, allowing you to process larger quantities of ingredients at once, which is ideal for meal prepping or when entertaining guests. The bowl is made from durable materials that can withstand the rigors of daily use while remaining easy to clean, as many parts are dishwasher safe.

Safety is a priority in the design of the KitchenAid W10154991A. It includes a safety lock feature that ensures the processor will not operate unless the bowl and lid are correctly secured. This feature gives users peace of mind while using the appliance and helps prevent accidents in the kitchen.

In terms of technology, the KitchenAid W10154991A employs a straightforward control panel that includes several speed settings. This means you can select the perfect speed for the task at hand, whether you need a gentle pulse or a steady chop. The intuitive design of the control panel makes it accessible for cooks of all skill levels.

In conclusion, the KitchenAid W10154991A food processor is an excellent investment for anyone looking to enhance their cooking experience. With its powerful motor, versatile attachments, user-friendly design, and safety features, this appliance stands out in the crowded market of kitchen gadgets. It empowers users to explore their culinary potential while simplifying time-consuming tasks in the kitchen.
Top Page Image Contents