KitchenAid W10154991A installation instructions To Convert TripleTier Flame Burner on some models

Page 22

4.Gas orifice spuds are stamped with a number on the side. Replace the LP gas orifice spud with the correct Natural gas orifice spud.

XXX

A

 

A. Stamped number

Refer to the following chart for the correct Natural gas orifice spud placement.

Natural Gas Orifice Spud Chart for Standard Surface Burners

Burner Location

Burner Rating

Size

Right front

6,000

Btu/h

1.10 mm

Left front

14,000

Btu/h

1.70 mm

Right rear

12,500

Btu/h

1.61 mm

Left rear

6,000

Btu/h

1.10 mm

 

 

 

 

5.Place LP gas orifice spuds in plastic parts bag for future use and keep with literature package.

6.Replace burner cap.

7.Repeat steps 1-6 for the remaining burners, except for the TripleTier® Flame burner (on some models). See “To Convert TripleTier® Flame Burners” section.

To Convert TripleTier® Flame Burner (on some models)

1.Remove burner cap.

2.Remove the burner head using a size T20 TORX® screwdriver.

3.Remove the plate on the external gas orifice spud.

A

B

C

D

A. Burner caps

B. Burner heads

C. External gas orifice spud access plate

D. Internal gas orifice spud

IMPORTANT: The TripleTier® Flame burner has 2 gas orifice spuds. Do not forget to change the external gas orifice spud located under the plate.

A

B

C

A.Plate

B.External gas orfice spud

C.Internal gas orifice spud

4.Apply masking tape to the end of a 7 mm nut driver to help hold the internal gas orifice spud in the nut driver while changing it. Press nut driver down onto the internal gas orifice spud and remove by turning it counterclockwise and lifting out. Set internal gas orifice spud aside.

5.Use a 7 mm combination wrench to remove the external orifice spud. Turn counterclockwise remove, set external gas orifice spud aside.

6.Replace the LP gas orifice spud with the correct Natural gas orifice spud. Refer to the following chart for correct Natural gas orifice spud placement.

Natural Gas Orifice Spud Chart for TripleTier® Flame Burners

Burner Location

Burner Rating

Size

Left front (external

12,200

Btu/h

1.70 mm

TripleTier® burner)

 

 

 

 

 

 

 

Left front (internal

2,800

Btu/h

0.70 mm

TripleTier® burner)

 

 

 

 

 

 

 

7.Replace burner plate, head and cap.

8.Place LP gas orifice spuds in plastic parts bag for future use and keep with literature package.

9.Reinstall the warming drawer. See the “Replace Oven Racks & Warming Drawer” section for instructions.

10.Complete installation. See “Make Gas Connection” and “Electronic Ignition System” sections.

Checking for proper cooktop burner flames is very important. Natural gas flames do not have yellow tips.

IMPORTANT: You may have to adjust “LO” setting for each cooktop burner.

22

Image 22
Contents DE 30 76,2 CM W10154991ARange Safety Table DES MatièresWhat to do if YOU Smell GAS ToolsandParts Installation RequirementsLocation Requirements Mobile home installations require Mobile Home Additional Installation RequirementsProduct Dimensions Freestanding Range Slide-in RangeFreestanding Ranges Installation ClearancesSlide-In Ranges Local codes may permit the use of a UL listed, 3-wire If connecting to a 4-wire systemIf connecting to a 3-wire system Electrical Requirements U.S.A.OnlyType of Gas Electrical Requirements -Canada OnlyGas Supply Requirements Gas Supply LineBurner Input Requirements Gas Supply Pressure TestingCountertopPreparation Gas Pressure RegulatorMeasureforProperHeight Installation InstructionsUnpack Range Slide-In RangesAdjust LevelingLegs InstallAnti-TipBracketLevel Range RemoveWarming DrawerVerifyAnti-Tip Bracket Location To Remove Warming DrawerStyle 1 Power supply cord strain relief Power Supply CordDirect Wire Electrical Connection -U.S.A.OnlyWire connection Power Supply Cord Style 2 Direct wire strain reliefDirect Wire Installation Copper or Aluminum Wire Wire Connection Direct WireMake Gas Connection Typical rigid pipe connectionTypical flexible connection Initial lighting and gas flame adjustmentsElectronicIgnitionSystem Complete ConnectionComplete Installation Replace Oven RacksandWarmingDrawerTo Convert Gas Pressure Regulator GAS ConversionsLPGas Conversion If range does not operate, check the followingTo Convert Standard Surface Burners Reinstall the cap onto the regulatorTo Convert TripleTier Flame Burners on some models Gas orifice spuds are stamped with a number, marked withNaturalGas Conversion To Convert TripleTier Flame Burner on some models Sécurité DE LA Cuisinière Votre sécurité et celle des autres est très importanteExigencesd’emplacement Exigences D’INSTALLATIONOutillageetpièces Dimensions du produit Cuisinière autoportante Cuisinière encastréeCuisinières autoportantes Dégagements de séparation à respecterCuisinières encastrées Type de gaz Spécifications électriquesSpécifications del’alimentation engaz Gaz naturelDébit thermique des brûleurs PréparationduplandetravailCanalisation de gaz Détendeur de gazMesurespourunehauteurappropriée Instructions DinstallationDéballagede lacuisinière Réglage despieds de nivellementInstallation de la brideantibasculement Réglage del’aplomb delacuisinière Vérificationdelemplacement de labride AntibasculementRetraitdutiroir-réchaud Raccordement à la canalisation degazCuisinière encastrée Installée sur le brûleur avant gaucheRaccordement typique par raccord flexible Compléter le raccordemantBrûleur à flamme TripleTier Système dallumageélectroniqueAllumage initial et réglages des flammes Si le brûleur ne sallume pas correctementConversions Pour Changement DE GAZ Réinstallationdes grillesdufouret Dutiroir-réchaudAcheverlinstallation Conversion pourlalimentationaupropaneImportant Ne pas enlever le détendeur Conversion des brûleurs standard de la table de cuissonDétendeur Enlever la plaque associée au gicleur externe Conversionpourlalimentation augaz naturel Chiffre gravé Holes in bracket Trous dans la bride All rights reserved

W10154991A specifications

The KitchenAid W10154991A is a versatile kitchen appliance designed to simplify meal preparation while enhancing culinary creativity. This food processor is equipped with innovative features and technologies that make it an essential addition to any modern kitchen.

One of the main features of the W10154991A is its powerful motor, which allows for quick and efficient processing of various ingredients. Whether you're chopping vegetables, shredding cheese, or mixing dough, this food processor can handle a wide range of tasks with ease. The motor's robust performance ensures that you can complete your cooking projects in a fraction of the time compared to using manual methods.

Another significant characteristic of the KitchenAid W10154991A is its variety of attachments and blades. The food processor comes equipped with multiple blades for different functions, including slicing, shredding, and chopping. This versatility enables users to achieve the desired texture and consistency for their recipes, all with one appliance. The included attachments are designed for easy installation and removal, making the transition between tasks seamless.

The design of the W10154991A also speaks to its user-friendly nature. It features a large capacity bowl, allowing you to process larger quantities of ingredients at once, which is ideal for meal prepping or when entertaining guests. The bowl is made from durable materials that can withstand the rigors of daily use while remaining easy to clean, as many parts are dishwasher safe.

Safety is a priority in the design of the KitchenAid W10154991A. It includes a safety lock feature that ensures the processor will not operate unless the bowl and lid are correctly secured. This feature gives users peace of mind while using the appliance and helps prevent accidents in the kitchen.

In terms of technology, the KitchenAid W10154991A employs a straightforward control panel that includes several speed settings. This means you can select the perfect speed for the task at hand, whether you need a gentle pulse or a steady chop. The intuitive design of the control panel makes it accessible for cooks of all skill levels.

In conclusion, the KitchenAid W10154991A food processor is an excellent investment for anyone looking to enhance their cooking experience. With its powerful motor, versatile attachments, user-friendly design, and safety features, this appliance stands out in the crowded market of kitchen gadgets. It empowers users to explore their culinary potential while simplifying time-consuming tasks in the kitchen.