Turn the lid clockwise – moving the ‘lid locking tab’ into the slot near the top of the motor unit - until the indicator line on the lid is aligned with the circle 
on the top of the bowl. A “click” sound will be heard, to indicate is correctly fitted.
NOTE: The Dual Food Processor & Blender will not operate unless the processing bowl, lid and blender drive cover are correctly locked into position.
For slicing and grating – ensure that the food items you want to slice or grate are of a suitable size to be feed through the food chute.
Place the food inside chute and push down with the ‘food pusher’.
NOTE! : Never push down any foods with your hands and do not put your hands down the food chute at any time during processing.
Insert slot
Lid
locking
tab
✓
Ensure the speed dial is in the ‘OFF’ position.
Insert power plug into a 230/240 volt power outlet. Turn power on.
The processor is now ready to use.
To begin processing/slicing/grating turn the ‘Power Control Dial’ from the ‘OFF’ position to either the Low, Medium or High speed, depending your requirements. The speed can be changed at any time during the process.
For short bursts of power, whilst processing, use the “PULSE” setting.
For using the processing blade – with the ingredients inside the processor bowl, start the unit on low speed moving to high if necessary. Before commencing ensure that the ‘food pusher’ is in place to avoid splashing from the food chute. Ingredients can be added through the food chute whilst processing.
If ingredients stick to the sides of the processor bowl during processing, turn the speed to the ‘OFF’ position, switch off at the power outlet, remove lid and then push the food back onto the blades using the plastic spatula to scrape down the sides of the bowl. Then recommence processing.
NOTE: Do not over fill the processor bowl past the MAX line for solids and past the 750ml mark for liquids. For greater quantities of liquids the blender jug should be used.
When processing is complete, turn to the ‘OFF’ position. Wait until blades have stopped rotating before removing the lid, blades or processor bowl.
ASSEMBLY AND OPERATION OF THE BLENDER
Your Dual Food Processor & Blender features 2 safety locking devices.
NOTE: the blender will not operate unless:
1.The blender jug is correctly positioned and LOCKED onto the motor base
2.The processor bowl AND lid are correctly locked into place (refer to previous instructions)
NOTE: The food processor will not operate while the blender jug is assembled to base. If processing is required, remove the blender and fit the Blender Drive Cover.
KFP100_FOODPROC_IB_FA.indd 8 | 29/5/09 4:27:59 PM |