Correct placement of the blender jug
Unlock and remove the blender drive cover.
Align the arrow 
on the lower edge of the blender
jug with the align handle arrow 
on the motor cover. Turn the blender jug clockwise until the arrow on the blender is aligned with the lock handle arrow 
on the motor cover, a “click” sound will be heard.
✓
Ensure the speed dial is in the ‘OFF’ position.
Insert power plug into a 230/240 volt power outlet. Turn power on.
The blender is now ready to use.
Place ingredients into the jug. Note do not overfill the jug (i.e., above the MAX mark).
Firmly fit the lid to the top of the blender. Ensuring that the ‘filler cap’ (inside the lid) is correctly locked into position.
With your hand on top of the blender lid initially, turn the ‘Power Control Dial’ from the ‘OFF’ position to either the Low, Medium or High speed, depending your requirements. The speed can be changed at any time during blending.
For short bursts of power, use the “PULSE” setting.
If ingredients stick to the sides of the jug during blending, turn the speed dial to the ‘OFF’ position, switch off at the power outlet, remove lid and then push the food back onto the blades using the plastic spatula to scrape down the sides of the jug. Then replace lid and recommence blending.
Ingredients can be added during blending by removing the ‘filler cap’ and placing/pouring additional ingredients through the hole.
Note: Do not overfill the blender jug above the MAX mark.
This blender is not recommended for blending dry ingredients.
When blending is complete, turn to the ‘OFF’ position. Wait until blades have stopped rotating before removing the lid or jug.
Maintaining your Kambrook dual Food Processor & blender
Always turn the power off at the power outlet and then unplug before disassembling any parts.
Wash the blender jug, lid, filler cap, processor bowl, blades, food pusher in warm soapy water after each use. Rinse thoroughly and dry.
Do not soak steel parts.
The processing blade and slicing/grating discs are extremely sharp! Use caution when handling and storing these parts. Always store the processing blade with the protective covers provided.
Store the food processor with the processing blade in the bowl and the lid and the food pusher in position, but DO NOT lock as this places unnecessary strain on the operating switch.
Never use an abrasive cleaner. Do not place any parts in the dishwasher.
Wipe the motor base with a soft, damp cloth.
DO NOT immerse the motor base, power plug or cord in water or any other liquid.
THE STAINLESS STEEL PROCESSING BLADE
The cutting edges of this blade are extremely sharp, it should only ever be held by the central plastic spindle.
ALWAYS store the blade with the protective cover provided.
KFP100_FOODPROC_IB_FA.indd 9 | 29/5/09 4:28:01 PM |