Changing a Cycle or Setting
During the first minute of a cycle
Press a new cycle and/or options.
After the first minute of a cycle
1.Press
CANCEL/DRAIN glows. The dishwasher starts a 2 minute drain (if needed). Let the dishwasher drain completely.
2.Check the detergent dispensers. If the main wash cup has opened and the detergent washed away, refill the cups as needed.
3.Close the door.
4.Press a new cycle and/or options.
5.Press START.
Adding Items During a Cycle
You can add an item anytime before the main wash starts. Open the door and check the detergent dispenser. If the cover is still closed, you can add items.
To add items
1.Lift up the door latch to stop the cycle. Wait for the spraying action to stop before opening the door.
2.Open the door. If the detergent dispenser cover is still closed, add the item.
3.Close the door firmly until it latches. The dishwasher resumes the cycle after about a 5 second pause.
Option Selections
You can customize your cycles by pressing an option. If you change your mind, press the option again to turn the option off. Select a different option if desired.
You can change an option anytime before the selected option begins. For example, you can press an unheated drying option any time before drying begins.
Press START to repeat the same cycle and options as the previous wash cycle.
NOTE: If the last cycle you completed was a rinse cycle, when you press Start, the dishwasher runs the last full wash cycle and options.
Hi-Temp Wash
Select this option to raise the water temperature in the main wash, and add a rinse. The higher water temperature, and added rinse, help clean tough soils.
This option adds heat, water and wash time to the cycle.
NOTE:
Energy Saver Dry
Select this option to dry dishes without heat and save energy. Energy Saver Dry is useful when loads contain plastic dinnerware that may be sensitive to high temperatures.
The dishes take longer to dry and some spotting can occur. For best drying, use a liquid rinse aid. Some items (such as plastics) may need towel drying.
NOTE: Rinse Only automatically uses this option. Energy Saver Dry is an option with all other cycles.
Control Lock
Use Control Lock to prevent your dishwasher from accidentally being turned on. Use Control Lock, also, to prevent accidental cycle or option changes during a cycle.
When CONTROL LOCK is lit, all buttons are disabled.
NOTES:
■The dishwasher door can be opened while the controls are locked.
■You can turn on the Lock while the dishwasher is running.
To turn on the Lock
Press and hold
for 4 seconds. CONTROL LOCK glows.
If you press any pad while your dishwasher is locked, the light flashes 3 times.
To turn off the Lock
Press and hold ENERGY SAVER DRY for 4 seconds. The light turns off.
Status Indicator
Water Heating
WATER HEATING glows, and the cycle progression pauses, whenever water is heated during a cycle.
Wash or rinse action continues as the water heats.
11