Preparing for USE, Machine Packaging | Philips HD8743, HD8747

10ENGLISH

PREPARING FOR USE

Machine Packaging

The original packaging has been designed and constructed to protect the machine during transport. We recommend keeping the packaging material for possible future transport.

Preparing for use

1Remove the coffee bean hopper lid and the drip tray with grill from the packaging.

2 Remove the machine from the packaging.

3 For best use, it is recommended to:

• Choose a safe, level surface, where there will be no danger of over- turning it or being injured.

•Choose a location that is sufficiently well-lit, clean and near an eas- ily reachable socket.

•Allow for a minimum distance from the sides of the machine as shown in the illustration.

4 Insert the drip tray with grill to the machine. Make sure it is fully in- serted.

Note:

The drip tray collects the water that comes out of the dispensing spout during each rinse/self-cleaning cycle as well as coffee that might be spilled during beverage preparation. Empty and clean the drip tray daily and each time the full drip tray indicator is raised.

Caution:

NEVER remove the drip tray when the machine has just been turned on. Wait a couple of minutes, since the machine will carry out a rinse/ self-cleaning cycle.