30ENGLISH
Let the brew group
Thoroughly clean the inside of the machine using a soft, dampened cloth.
Make sure the brew group is in the rest position; the two reference signs must match. If they do no match, proceed as described in step (8).
Gently pull down the lever until it is in contact with the brew group base and the two reference signs on the side of the brew group do match
Make sure the hook to lock the brew group is in the correct position by firmly pressing the “PUSH” button until you hear a click. Check if the hook is at the top end position. If it is not, please try again.
Insert the brew group in its seat again until it locks into place WITHOUT pressing the “PUSH” button.
Insert the coffee grounds drawer. Close the service door.