Philips HD8743, HD8747, HD8745 user manual Rinsing Cycle

34ENGLISH

When the green “” light starts flashing slowly, turn the control dial to the “” position. The red “” light turns on.

Empty the large container and the drip tray and place them back.

Rinsing Cycle 1

Rinse the water tank and fill it up to the MAX level with fresh water.

Put it back in the machine.

When the green “” light turns on, turn the control dial to the “ ” position. The machine will prime its internal circuits.

After this, the green “” light starts flashing slowly. Turn the control dial to the “” position.

The machine dispenses water internally in the drip tray. It does not dispense through the hot water/steam wand.

When the green“” light turns on, turn the control dial to the “ ” position. The machine now dispenses through the hot water/

steam wand until the water tank is empty.

Note:

If you want to stop dispensing (for example to empty the container), turn the control dial to the “” position. To restart dispensing, turn the control dial back to the “ ” position.