38 ENGLISH
Light Signals | Causes | Solutions | ||
|
|
|
|
|
|
|
| The coffee bean hopper is empty. | Fill the coffee bean hopper with coffee beans and start the |
|
|
| ||
|
|
|
| procedure again. |
|
|
|
|
|
|
|
| The coffee grounds drawer is full. | With the machine turned on, empty the coffee grounds drawer. If |
|
|
|
| the coffee grounds drawer is emptied with the machine turned off |
|
|
|
| the coffee cycle counter is not reset. Wait until the “ ” light starts to |
| Steady on |
| flash before placing back the coffee grounds drawer. | |
|
|
| ||
|
|
|
|
|
|
|
| The water circuit is empty. | Fill the water tank with fresh water and dispense hot water as |
|
|
| ||
|
|
|
| described in Section “Using the Machine for the First Time”. |
|
|
|
|
|
Quickly flashing
Brew group is not inserted. Coffee ground drawer is not inserted.
Service door is open.
Control dial is not in correct position.
Make sure that all components have been correctly inserted and closed. The flashing “
” light will now turn off.
Slowly flashing
The machine is performing the rinse/self- cleaning cycle.
The machine ends the 
”
either “
” buttons
Flashing in counter-clockwise
direction
A fault has occurred in the brew group. | Try again to brew another espresso or a coffee. |
Flashing alternately
The machine is out of order.
Turn the machine off. After
If the machine does NOT start, contact the Philips Saeco hotline.
Flashing simultaneously