Philips HD8743, HD8747, HD8745 user manual Automatic rinse/self-cleaning cycle

ENGLISH 13

Turn the control dial to the “ ” position and wait few seconds.

3 When water steadily comes out and the “ “ light flashes slowly, turn the control dial back to the “” position. The machine is in warm-up mode (light ““ flashes slowly).

Automatic rinse/self-cleaning cycle

When warm-up is complete, the machine automatically performs a rinse/ self- cleaning cycle of the internal circuit with fresh water. This takes less than a minute.

1Place the container under the dispensing spout to catch the small amount of water which will be dispensed.

2 The indicator lights flash counter clock wise.

3 Wait for the cycle to finish automatically.

Note:

You can stop dispensing, by pressing either “ “ or “ “ button.

Flashing

4Wait for the water dispensing to stop. The ““ light is now shining stea- dily.