12ENGLISH
Insert the plug of the other end of the power cord into a wall socket with suitable power voltage.
Make sure the control dial is on the “
” position.
Press the ON/OFF button to turn the machine on; the “ “ light will begin to flash quickly indicating that the circuit has to be primed.
USING THE MACHINE FOR THE FIRST TIME
When using the machine for the first time, the following activities need to happen:
1)You need to prime the circuit.
2)The machine will perform an automatic
3)You need to initiate a manual rinse cycle.
Circuit priming
During this process fresh water flows through the internal circuit of the machine and the machine warms up. This takes a few seconds.
1Place a container (1L) under the hot water/steam wand or Pannarello (if supplied).